摘要
This paper reports that Ni and Ti/4H-SiC Schottky barrier diodes （SBDs） were fabricated and irradiated with 1 MeV electrons up to a dose of 3.43 × 10^14 e/cm2. After radiation, the Schottky barrier height φB of the Ni/4H-SiC SBD increased from 1.20 eV to 1.21 eV, but decreased from 0.95 eV to 0.94 eV for the Ti/4H-SiC SBD. The degradation of φB could be explained by interface states of changed Schottky contacts. The on-state resistance Rs of both diodes increased with the dose, which can be ascribed to the radiation defects. The reverse current of the Ni/4H-SiC SBD slightly increased, but for the Ti/4H-SiC SBD it basically remained the same. At room temperature, φB of the diodes recovered completely after one week, and the RS partly recovered.
This paper reports that Ni and Ti/4H-SiC Schottky barrier diodes （SBDs） were fabricated and irradiated with 1 MeV electrons up to a dose of 3.43 × 10^14 e/cm2. After radiation, the Schottky barrier height φB of the Ni/4H-SiC SBD increased from 1.20 eV to 1.21 eV, but decreased from 0.95 eV to 0.94 eV for the Ti/4H-SiC SBD. The degradation of φB could be explained by interface states of changed Schottky contacts. The on-state resistance Rs of both diodes increased with the dose, which can be ascribed to the radiation defects. The reverse current of the Ni/4H-SiC SBD slightly increased, but for the Ti/4H-SiC SBD it basically remained the same. At room temperature, φB of the diodes recovered completely after one week, and the RS partly recovered.
基金
supported by the National Natural Science Foundation of China(Grant No 60606022)
the Xian Applied Materials Foundation of China(Grant No XA-AM-200702)
the Advanced Research Foundation of China(Grant No 9140A08050508)
