摘要
柿竹园多金属矿黑、白钨矿的比例约为 3∶ 7,根据黑钨矿的矿石性质 ,在磨矿回路中加入重选早收已解离的单体钨矿物 ,有利于减轻黑钨矿过粉碎和减少黑钨细泥 .小型试验、扩大试验和工业试验 ,在磨矿回路中获得 11.82 %～ 16.97%的黑钨回收率 ,使全流程合格钨精矿的总回收率达 81.89%～ 86.2 3% .
The ratio of wolframite to scheelite at Shizhuyuan Multi- metal Mine is about3to7.According to the property of wolframite,recovering liberated tungsten mine- rals early in the grinding circuit with gravity separation not only can reduce the over comminution of wolframite but the amount of its slime can also be reduced.The recovery of wolframite from 1 1 .82 % to 1 6 .97% has been achieved in bench- scale test,pilot- scale test and industrial- scale test.This has made the general recovery of qualified tungsten concentrate reach81 .89% to86 .2 3% .
出处
《广东有色金属学报》
1998年第1期15-20,共6页
Journal of Guangdong Non-Ferrous Metals
关键词
磨矿回路
重选
黑钨矿
选矿
grinding circuit,gravity separation,wolframite
