期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

复合材料燃料贮箱渐进损伤分析与剩余强度预报 被引量：2

PROGRESSIVE FAILURE ANALYSIS AND RESIDUAL LIFE PREDICTION FOR FUEL TANK
下载PDF
导出
摘要 基于复合材料渐进失效准则和刚度降阶模型,建立了复合材料燃料贮箱性能演化的表征模型和分析模型,借助有限元软件ABAQUS对内压作用下复合材料贮箱结构的渐进损伤过程进行了分析,实现了复合材料贮箱结构剩余强度的预报,通过与文献数据的比较,验证了该分析方法的有效性. The progressive failure analysis and residual life prediction of composite fuel tank are an important part of safety evaluations of RLV. In this paper, based on classical laminates theory, analytic and token models of composite fuel tank are built. By the finite element software ABAQUS, the progressive failure analysis is carried out and the residual life of a fuel tank is predicted. Compared with literature data, good agreements are obtained, which validates the methods proposed in the paper.
作者 章继峰 王振清 张博明
机构地区 哈尔滨工程大学航天工程系 哈尔滨工业大学复合材料研究所
出处 《力学与实践》 CSCD 北大核心 2009年第2期46-49,共4页 Mechanics in Engineering
基金 国家863项目(2006AA702404) 中国博士后基金项目 黑龙江博士后基金项目资助.
关键词 复合材料 渐进失效 贮箱 composites, progressive failure, tank
分类号 V215 [航空宇航科学与技术—航空宇航推进理论与工程]
  • 相关文献

参考文献9

  • 1Michael S, Anthony NP. Progressive failure analysis of a corpposite shell. Composite Structures, 2001, 53:117-131.
  • 2Damodar R, Naivin J, Hilburger MW. Progressive failure studies of stiffened panels subjected to shear loading. Composite Structures, 2004, 65:129-142.
  • 3Domodar RA, Navin J, Hilburger MW, et al. Progressive failure analysis of compression -loaded composite curved panels with and without cutouts. Composite Structures, 2004, 65:143-155.
  • 4Huang ZM. Progressive flexural failure analysis of laminated composites with knitted fabric reinforcement. Mechanics of Materials, 2004, 36:239-260.
  • 5徐焜,许希武.三维编织复合材料渐进损伤的非线性数值分析[J].力学学报,2007,39(3):398-407. 被引量：31
  • 6Lopes CS, Camanbo PP, Gurdal Z, et al. Progressive failure analysis of tow-placed variable-stiffness composite pan- els. International Journal of Solids and Structures, 2007, 44:8493-856.
  • 7刘希国,张双寅.纤维复合材料复合型断裂正应力强度因子比准则[J].力学与实践,2003,25(2):26-28. 被引量：1
  • 8Tsai Stephen W, Edward M Wu. A general theory of strength for anisotropic materials. J Composite Materials, 1971. 58-80.
  • 9赵海涛.复合材料压力贮箱健康监测的一体化研究.[博士论文].哈尔滨:哈尔滨工业大学,2008.61-70.

二级参考文献22

  • 1徐焜,许希武.四步法三维矩形编织复合材料的细观结构模型[J].复合材料学报,2006,23(5):154-160. 被引量：23
  • 2Sun HY,Qiao X.Prediction of the mechanical properties of three-dimensionally braided composites.Composites Science and Technology,1997,57(6):623～629
  • 3Tang ZX,Postle R.Mechanics of three-dimensional braided structures for composite materials-part 3:nonlinear finite element deformation analysis.Composite Structure,2002,55(3):307～317
  • 4Zeng T,Fang DN,Ma L,et al.Predicting the nonlinear response and failure of 3D braided composites.Materials Letters,2004,58(26):3237～3241
  • 5Gu BH.Prediction of the uniaxial tensile curve of 4-step 3-dimensional braided preform.Composite Structure,2004,64(2):235～241
  • 6Suquet P.Elements of homogenization theory for inelastic solid mechanics.In:Sanchez-Palencia,E.,Zaoui,A,Homogenization Techniques for Composite Media.Springer-Verlag,Berlin,194～275
  • 7Xia ZH,Zhou CW,Yong QL,et al.On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites.International Journal of Solids and Structures,2006,43:266～278
  • 8Richard RM,Blacklock JR.Finite element analysis of inelastic structures.AIAA Journal,1969,7(3):432～438
  • 9Hahn HT,Tsai SW.Nonlinear elastic behavior of unidirectional composite laminae.Journal of Composite Materials,1973,7:102～118
  • 10Chamis CC.Mechanics of composites materials:past,present and future.Journal of Composites Technology and Research,1989,11(1):3～14

共引文献30

同被引文献21

  • 1徐焜,许希武.三维编织复合材料渐进损伤的非线性数值分析[J].力学学报,2007,39(3):398-407. 被引量：31
  • 2Huang Zhengming. Micromechnical prediiction of ultimate slrength of transversely isotlopic fibrous composites [J].International Journal of Solids and Structures, 200l. 3S(23): 4147-4172.
  • 3Haj Ali R,Kilic H,Muliana A.Nested nonlinear micromechanical and structural models for the analysis of thicksection composite materials and structure[J].Composites Science and Technology,2007,67(10):1993-2001.
  • 4Kwon Y W,Berner J M.Micromechanics model for damage and failure anayses of laminated fibrous composites[J].Engineering Fracture Mechanics,1995,52(2):231-242.
  • 5Mishnaevsky L.L.Schmauder S.Conitnuum meso--mechanical finite element modeling in materials development:A state-of -the art review[J].Appl Mech Rev,2001,54(1):49-75.
  • 6Huang Zhengming. Micromechnical prediction of ultimate strength of transversely isotropic fibrous composites [J]. International Journal of Solids and Structures, 2001, 38: 4147-4172.
  • 7Ireneusz Lapczyk, Juan A. Hurtado. Progressive damage modeling in fiber-reinforced materials [J]. Composites: Part A, 2007, 38: 2333-2341.
  • 8Pineda Evan J, Waas Anthony M, Bednarcyk Brett A. Progressive damage and failure modeling in notched laminated fiber reinforced composites [J]. Springer Science, 2009, 158: 125-143.
  • 9Zhang Boming, Yang Zhong, Wu Yufeng, Sun Hongwei. Hierarchical multiscale modeling of failure in unidirectional fiber-reinforced plastic matrix composite [J]. Materials and Design, 2010, 31: 2312-2318.
  • 10Rami Haj-Ali, Hakan Kilic, Anastasia Muliana. Nested nonlinear micromechanical and structural models for the analysis of thick-section composite materials and structure [J]. Composites Science and Technology, 2007, 67: 1993-2004.

引证文献2

二级引证文献14

力学与实践
2009年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部