期刊文献+

两种变形双脊波导传输特性的分析研究 被引量:3

Study of transmission characteristics of two kinds of deformed dual-ridge waveguide
下载PDF
导出
摘要 为了寻找最佳传输特性的对称双脊波导结构,提出了圆形和椭圆形两种变形对称双脊波导,采用有限元的方法,研究了圆形和椭圆形两种变形对称双脊波导对传输特性的影响。计算了脊尺寸变化时的截止波长和单模带宽,给出了主模场结构图以及变形对截止波长和单模带宽影响的相应的关系曲线,并分析了传输特性随对称脊波导结构尺寸的变化情况。该研究结果对变形双脊波导的应用和研究提供了参考,并为脊波导器件的小型化提供了指导。 In order to find a symmetrical dual-ridged waveguide with optimal transmission characteristics, two novel dualridged waveguides with circle and ellipse ridges respectively were put forward. The influence of both the deformed dual-ridged waveguides on the transmission characteristics of the waveguide was analyzed by means of finite element method. The cutoff wavelength and single-mode bandwidth were calculated for different ridge dimensions. The field patterns of dominant mode and the curve for the effect of deformation on the cutoff wavelength and brand width were drawn. Finally, the relationship between the transmission characteristics and the dimension of the ridges was analyzed. It is shown that these results can provide valuable reference of application and study of the deformed dual-ridge waveguides and provide instructions for miniaturization of ridged waveguide apparatus.
出处 《激光技术》 CAS CSCD 北大核心 2009年第3期333-336,共4页 Laser Technology
基金 国家"八六三"高技术研究发展计划资助项目(2007AA11Z211)
关键词 光电子学 传输特性 有限元法 截止波长 单模带宽 主模场结构 optoelectronics transmission characteristics finite element method cutoff wavelength single-mode bandwidth dominant field chart
  • 相关文献

参考文献4

二级参考文献29

  • 1苏洁梅,戴基智,杨亚培.光波导放大器的研究进展[J].激光技术,2004,28(6):604-608. 被引量:4
  • 2Cohn S B. Properties of Ridge Waveguide [ J ]. Proe.IRE, 1974, 35(8) : 783 - 788.
  • 3Hopfer S. The Design of Redged Waveguide [ J ]. IRETrans. MTr, 1955, 3(10): 20-29.
  • 4Pyle J R. The Cutoff Wavelength of the TEl0 Mode in Ridged Rectangular Waveguide of any Aspect Ratio [ J ].IEEE Trans. MTr, 1966, 14(4): 175-183.
  • 5Montgomery J P. On the Complete Eigenvalue Solution of Ridged Waveguide[J]. IEEE Trans. MTr, 1971, 19(6) : 547 - 555.
  • 6Swaminathan M, Arvas E, Sarkar T K. Compution of Cutoff Wavenumbers of TE and TM Modes in Waveguides of Arbitrary Cross Sections Using a Surface Integral Formulation[J]. IEEE Trans. MTr, 1990, 38(2) : 154- 159.
  • 7Weimin Sun, Balanis C A. MFIE Analysis and Design of Ridged Wavegnides[J]. IEEE Trans. MTF, 1993, 41 (11):965- 1971.
  • 8SAAD A M K,MILLER J D,MITHA A et al.Analysis of antipodal ridge waveguide structure and application on extremely wide stopband lowpass filter[A].IEEE Microwave Symposium Digest,MTT-S International[C].Mississauga,Ontario,Canada:MA Electronics Canada,A Division of M/A-COM Inc.,1986.361-363.
  • 9LU M,LEONARD P J.Design of trapezoidal-ridge waveguide by finite-element method[J].IEE Microwaves Antennas and Propagation Proceedings,2004,151(3):205-211.
  • 10RONG Y,ZAKI K A.Characteristics of generalized rectangular andcircular ridge waveguides[J].IEEE Transactions on Microwave Theory and Techniques,2000,48(2):258-265.

共引文献31

同被引文献9

引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部