摘要
目的:通过工艺优化,制备释放度符合肠溶制剂要求的三七总皂苷微丸。方法:采用挤出滚圆技术,首先制备三七总皂苷载药丸芯,然后采用流化床底喷包衣设备,以丙烯酸树脂类包衣材料Eudragit L30D-55对载药丸芯进行包衣并用中心复合设计优化肠溶包衣处方。结果:所得三七总皂苷肠溶微丸在人工胃液中2 h内累积释放百分数小于5%,在模拟人体胃肠道环境中3 h内累积释放85%以上。结论:制得的三七总皂苷肠溶微丸抗酸性好,具备较理想的肠溶特征,避免了三七总皂苷类成分在胃液中的降解。
Objective: To prepare enteric coated pellets containing panax notoginseng saponins. Method: panax notoginseng saponins loaded pellets were prepared by Extrusion-Spheronization method, and coated by Eudragit L30D-55 using Glatt fluid bed with the bottom spray process, central composite design was used to optimize the coating prescription. Result: The drug release of enteric coated pellets of panax notoginseng saponins pellets would be lower than 5% in 2 h in simulated gastric fluid, but reach above 85% in 3 h in simulated human gastroenterie environment. Conclusion: The enteric coated pellets of panax notoginseng saponins have good acid residence to avoid panax notoginseng saponins from degrading in gastric acid.
出处
《中国中药杂志》
CAS
CSCD
北大核心
2009年第11期1359-1363,共5页
China Journal of Chinese Materia Medica
基金
国家"十一五"科技支撑计划项目(2006BAI09B08-01)
江西省卫生厅中医药科研基金(2007A026)
关键词
三七总皂苷
肠溶微丸
丙烯酸树脂
中心复合设计
panax notoginseng saponins
enteric pellets
EudragitL30D-55
central composite design