摘要
通过插层聚合方法,制备出银氨蒙脱土/聚丙烯酸钠-丙烯酰胺共聚物复合调湿抗菌材料,并对材料的表面形貌、结构、吸放湿和抗菌性能进行了研究.实验结果表明,共聚物复合调湿抗菌材料的结构疏松,表面存在较大孔隙;丙烯酸-丙烯酰胺分子单体经插层聚合成功地引入到蒙脱土层间,层间距扩大为2.143n,m.与聚丙烯酰胺、银氨蒙脱土/聚丙烯酰胺材料相比,银氨蒙脱土/聚丙烯酸钠-丙烯酰胺共聚物复合材料具有较高的吸放湿容量和吸放湿速度;且对大肠杆菌和藤黄微球菌具有较强的抑菌效果,抑菌率均在90%以上.
[Ag（NH3）2]^＋ modified montmorillonite/polysodium acrylate-acrylamide （sMMT/copolymer）composite was synthesized by water solution intercalation and polymerization methods, and then the surface morphology, structure, humidity controlling and antibacterial behaviors of sMMT/copolymer composite were analyzed. The results show that the sMMT/ copolymer composite is loose and porous on surface. The acrylate-acrylamide monomer is successfully intercalated into the layers of montmorillonite,and the distance between two layers is increased to 2.143 nm. Compared with polyacrylamide （PAM） ,montmorillonite/polyacrylamide （sMMT/PAM） composite,the as-prepared sMMT/copolymer composite has a greater capacity and higher speed of humidity absorption and desorption. By using E Coli and Micrococcus Luteus as detective bacteria, sMMT/copolymer composite has a very good antibacterial effect with the antibacterial rate above 90%.
出处
《天津大学学报》
EI
CAS
CSCD
北大核心
2009年第6期507-512,共6页
Journal of Tianjin University(Science and Technology)
基金
天津市应用基础及前沿技术研究计划重点资助项目(08JCZDJC18000)
武汉理工大学硅酸盐材料工程教育部重点实验室开放基金资助项目(SYSJJ2004-05)
关键词
蒙脱土
丙烯酸钠-丙烯酰胺
复合材料
结构
调湿
抗菌
montmorillonite
sodium acrylate-acrylamide
composite
structure
humidity controlling
antibacterial
