摘要
采用X射线衍射、扫描电镜和压缩试验等手段,研究了不同条件下AlxCoCrCuFeNi多主元高熵合金的组织与力学性能。结果表明,铸态合金为典型的树枝晶组织,枝晶间存在明显的Cu富集;随着Al含量的增多,FCC相含量减少,BCC相含量增多,从而导致AlxCoCrCuFeNi具有较高的屈服强度,而且塑性应变量超过5.8%。
Effects of Al content on microstructure and mechanical properties of AlxCoCrCuFeNi multi-element high entropy alloy were investigated by XRD(X-ray diffraction),SEM(scanning electron microscope)and compressive testing.The results verify that microstructure of the as-cast alloy exhibits typically dendrite in which there exists distinctly Cu-enrichment.With increasing in Al content,FCC content is decreased and BCC phase content is increased,which results in the high yield strength and plastic strain more than 5.8% in AlCoCrCuFeNi alloy.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2009年第6期579-581,共3页
Special Casting & Nonferrous Alloys
基金
国家重点基础研究发展计划(973计划)资助项目(2007CB607603)
新世纪人才计划资助项目
关键词
多主元高熵合金
微观结构
力学性能
Multi-element High Entropy Alloy,Microstructure,Mechanical Properties