期刊文献+

Fe-Cr-Co永磁合金的激光辐照效应研究

Laser Irradiation of Fe-Cr-Co Permanent Magnetic Alloy
下载PDF
导出
摘要 对Fe-Cr-Co永磁合金经激光辐照后的磁性能、微观组织结构变化进行了研究和分析。结果表明,当激光功率为3000 W时,随扫描速度的减慢,合金磁性能下降幅度增大,当扫描速度为600 mm/min时试样接近退磁状态。激光辐照后试样表层的薄区中发生了α→γ相变。激光辐照的作用机制主要是热效应和少量的冲击力学效应以及相变引起的相变区和非相变区间的应力集中。 The magnetic properties and microstructures of Fe-Cr-Co permanent magnetic alloy after laser irradiation were investigated. The results show that the magnetic properties decrease dramatically with the increase of scanning velocity, and the sample appears to be demagnetized when the scanning velocity is 600 mm/min. The α→γ phase transformation occurs in the very thin surface layer after laser irradiation. The main effects of laser irradiation are heat effect, dynamic impact effect as well as the stress concentration between the new-phase and the matrix.
出处 《金属功能材料》 CAS 2009年第3期1-4,共4页 Metallic Functional Materials
关键词 Fe—Cr-Co永磁合金 激光辐照 相变 Fe-Cr-Co permanent magnetic alloy laser irradiation phase transformation
  • 相关文献

参考文献12

  • 1Kaneko H, Homma M, Nakamura K. New ductile permanent magnet of Fe-Cr-Co system[C]. AIP Conf Proc 1971, 5:1088-1092.
  • 2Kaneko H, Homma M, Nakamura K, et al. Fe-Cr-Co permanent magnet alloys containing silicon[J]. IEEE Trans Magn, 1972: 347-348.
  • 3Szymura S. The effect of silicon on the structure and properties of Fe-Cr-Co permanent magnet alloys[J]. J Magn Magn Mater, 1986, 53: 379-389.
  • 4Sugimoto S, Satoh H, et al. Evolution process of <100> texture in Fe-Cr-Co-Mo permanent magnets[ J]. Mater Trans, 1991, 32(6) :557-561.
  • 5Kaneko H, Homma M, et al. Fe-Cr-Co Permanent magnet alloys containing Nb and AI[J]. IEEE Trans Magn, 1975,11(5):1440-1441.
  • 6李腾,董生智,金瑞湘,陈敏勤,李卫.Fe-Cr-Co系永磁合金结构与性能[J].金属功能材料,2002,9(5):13-17. 被引量:5
  • 7金瑞湘.高矫顽Fe-Cr-Co永磁合金[J].电工材料,2001(4):26-30. 被引量:4
  • 8陈子茂.铸造Fe-CrCo永磁.磁性材料及器件,1984,15(1):26-32.
  • 9John R Bradley, Raja K Mishra, et al. Microstructure and magnetic properties of COz Laser surface melted Nd-Fe-B magnets [J]. J MagnMagnMater,1990, 86: 44-50.
  • 10丁力.激光辐照Z10硅钢片的磁性能研究[J].吉林化工学院学报,1993,10(1):58-61. 被引量:2

二级参考文献5

  • 1徐鹏兴.可加工Fe-Cr-Co永磁合金的发展近况[J].金属材料,1981,2:39-51.
  • 2李东升.(BH)max=7.0MGOe的Fe-Cr-Co变形永磁合金[J].科学通报,1982,4:215-218.
  • 3Li T,IBMJ R&D,1967年,11卷,5期,527页
  • 4李东升.Mo,Ti,Zr在铁铬钴变形永磁合金中的作用[J].科学通报,1982,12:748-751.
  • 5李东升.合金成份及某些添加元素对Fe-Cr-Co变形永磁合金性能的影响[J].仪表材料,1983,5:1-11.

共引文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部