期刊文献+

重钢提高精粉率烧结技术研讨

Discussion on sintering technology for increasing concentrates ratio in Chongqing Steel
下载PDF
导出
摘要 实验结果表明,随着精粉率提高,技术经济指标除烧结利用系数总体下降外。其他各项指标得到改善;技术评价表明,精粉率50%较优。精粉率40%次之。烧结生产精粉率最高达到45%。通过降低燃料配比、加强水分控制、改变烧结熔剂结构、保持返矿基本平衡,烧结主要技术经济指标得到改善。 As the result of experiment showed: the higher the rate of iron concentrate was, the better the economic and technical index was, but the productivity of sintering reduced. Technical appraisal showed: the rate of iron concentrate is 50%(quite good), 40%(goed). The rate of sintering iron concentrate reached 45%, Through reducing the ratio of fuel, strong control of water, changing the structure of staflux, keeping balance of returning fines, the economic and technical index increased.
出处 《重钢技术》 2009年第2期1-3,共3页 CISC Technology
关键词 烧结 精粉率 技术 研讨 Sintering rate of iron concentrate technology research
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部