摘要
山东某钛铁矿矿石性质具有矿物组成复杂、矿物嵌布粒度细等特点,采用"阶段磨矿—阶段选别"的磁选、浮选联合流程对该复杂钛铁矿矿石进行了选矿试验研究,结果表明:对于含Fe 19.48%,TiO29.40%的原矿,可以获得含Fe 66.42%的铁精矿和含TiO245.28%的钛精矿的选矿指标。
A ilmenite ore in Shandong was characterized with complex mineral composition and fine dissemination size. A test for separation of complex ilmenite had been carried out using the "stage grinding -stage concentration" combination flowsheet consisting of magnetic separation, flotation. The result of test showed that under the condition of the run - of - mine ore of Fe 19.48% and TiO2 9.40%, iron concentrate containing Fe 66.42% and titanium concentrate containing TiO2 45.28% can be obtained respectively.
出处
《矿产保护与利用》
2009年第3期23-26,共4页
Conservation and Utilization of Mineral Resources
基金
2006年度矿山企业提高开采回收技术改造项目(鲁财建[2006]55号文)
关键词
钛铁矿
工艺矿物学
磁选
浮选
阶段磨矿
阶段选别
ilmenite ore
technological mineralogy
magnetic separation
flotation
stage grinding
stage concentration