期刊文献+

一个新的低周疲劳失效准则 被引量:2

A NEW CRITERION FOR LOW CYCLIC FATIGUE FAILURE
下载PDF
导出
摘要 利用修正的塑性循环应变能瞬态响应数学模型,给出了一个新的低周疲劳失效准则,由此得出了低周疲劳寿命的估算公式,并且采用低周疲劳试验验证了该失效准则的合理性和有效性. In this paper, a revised mathematical model of the transient response of the cyclic plastic strain energy was used to establish a new criterion for low cyclic fatigue failure. A formula used for the estimation of low cyclic fatigue life was given from this criterion, the rationality and efficacy of the new criterion were verified by means of a low cyclic fatigue test.
出处 《理化检验(物理分册)》 CAS 1998年第6期17-19,共3页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 低周疲劳 失效准则 塑性应变能 疲劳寿命 Low cyclic fatigue Failure criterion Plastic strain energy
  • 相关文献

参考文献1

二级参考文献3

同被引文献33

  • 1姚磊江,童小燕,吕胜利.关于疲劳能量理论若干问题的讨论[J].机械强度,2004,26(z1):278-281. 被引量:10
  • 2宋谋胜,刘忠侠,李继文,宋天福,王明星,谢敬佩,翁永刚.加钛方式与钛含量对A356合金组织和性能的影响[J].中国有色金属学报,2004,14(10):1729-1735. 被引量:23
  • 3刘忠侠,宋谋胜,李继文,翁永刚,王明星,宋天福.A356合金的低周疲劳行为及塑性应变能[J].中国有色金属学报,2006,16(2):260-267. 被引量:12
  • 4Kliman V,Bily M.Hysteresis energy of cyclic loading[J].Mater Sci Eng A,1984,68(1):11-18.
  • 5Prasad N E,Vogt D,Bidlingmaier T,et al.High temperature,low cycle fatigue behaviour of an aluminium alloy(Al-12Si-CuMgNi)[J].Mater Sci Eng A,2000,A276(1-2):283-287.
  • 6Avalle M,Belingardi G,Cavatorta M P,et al.Casting defects and fatigue strength of a die cast aluminium alloy:a comparison between standard specimens and production components[J].International Journal of Fatigue,2002,24(1):1-9.
  • 7Buffiere J Y.Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast alloys[J].Mater Sci Eng A,2001,A316(1-2):115-126.
  • 8FAN Jing-hong,McDowell D L,Mark F,et al.Cyclic plasticity at porosities and inclusions in cast Al-Si alloys[J].Engineering Fracture Mechanics,2003,70(10):1281-1302.
  • 9Han S W,Katsumata K,Kumai S,et al.Effects of solidification structure and aging condition on cyclic stress-strain response in Al-7%Si-0.4%Mg cast alloys[J].Mater Sci Eng A,2002,A337(1-2):170-178.
  • 10Zhang B,Chen W,Poirier D R.Effect of solidification cooling rate on the fatigue life of A356.2-T6 cast aluminium alloy[J].Fatigue Fact Eng Mater Struct,2000,23:417-423.

引证文献2

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部