期刊文献+

PEMFC不同冷起动方法的仿真研究 被引量:5

Simulation research of different cold start methods for PEMFC
下载PDF
导出
摘要 建立了质子交换膜燃料电池(PEMFC)冷起动的瞬态集总参数模型,并在Matlab/Simulink平台上建立了相应的仿真模型。采用不同的加热方法使电堆达到冷起动的要求,并对电堆的冷起动特性进行仿真分析,得到电堆不同加热方法的内部温度分布规律,为确定电堆冷起动的方案提供理论依据。 A transient and lumped parameter model of cold start for proton exchange membrane fuel cell were developed.Corresponding simulation model was builded with Matlab/Simulink software. Reseach the requirement of stack cold start by adopting different heating methods, and analyze the character of stack cold start, gain the regularity of distribution of stack interior temperature, and provide the theoretical foundation in order to determine the scheme of the stack cold start.
出处 《电源技术》 CAS CSCD 北大核心 2009年第6期479-481,共3页 Chinese Journal of Power Sources
基金 国家"863"燃料电池轿车项目(2007AA11A107)
关键词 质子交换膜燃料电池 冷起动 仿真模型 加热方法 proton exchange membrane fuel cell cold start simulation model heated method
  • 相关文献

参考文献7

  • 1黄成勇,潘牧,唐浩林.燃料电池冰点以下低温特性研究现状[J].电源技术,2007,31(7):578-581. 被引量:5
  • 2SUNDARESAN M,MOORE R M.Polymer electrolyte fuel cell stack thermal model to evaluate subfreezing start-up [J].J Power Sources, 2005,145:534-545.
  • 3KHANDELWAL M,SUNGHO L, MENCH M M.One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack [J].J Power Sources,2007, 172:816-830
  • 4AMPHLETT J C, MANN R F, PEPPLEY B A,et al. A model predicting transient responses of proton exchange membrane fuel cells [J].J Power Sources, 1996, 61:183-188
  • 5DE FRANCESCO M,ARATO E.Start-up analysis for automotive PEM fuel cell systems[J].J Power Sources, 2002,108: 41-52.
  • 6AMPHLETT J C, BAUMERT R M, MANN R F,et al.Performance modeling of the ballard mark IV solid polymer electrolyte fuel cell II. Empirical model development[J].J Electrochemical Soc, 1995, 142:9-15.
  • 7SUNDARESAN M.A thermal model to evaluate sub-freezing startup for direct hydrogen hybrid fuel cell vehicle polymer electrolyte fuel cell stack and system[M]. US:University of California, Davis, 2004

二级参考文献30

  • 1GARLAND N.DOE program/targets and workshop objectives[EB/OL].http://wwwl.eere.energy.gov/hydrogenandfuelcells/pdfs/01_garland_freeze.pdf,2005-02-01.
  • 2FLETCHER N J,BOEHM G A,POW E G.Method and apparatus for commencing operation of a fuel cell electric power generation system below the freezing temperature of water[P].USP:5798186,1998-08-25.
  • 3US Department of Energy.Draft funding opportunity announcement research and development of polymer electrolyte membrane (PEM)fuel cells for the hydrogen economy[EB/OL].http://www1.eere.energy.gov/hydrogenand fuelcells/pdfs/sow_draft.pdf,2005-04-25.
  • 4HISHINUMA Y,CHIKAHISA T,KAGAMI F,et al.The design and performance of a PEMFC at a temperature below freezing[J].JSME International Journal Series B,2004,47(2):235-241.
  • 5OSZCIPOK M,ZEDDA M,RIEMANN D,et al.Low temperature operation and influence parameters on the cold start ability of portable PEMFCs[J].Journal of Power Sources,2006,154(24):404-411.
  • 6HOTTINEN T,HIMANEN O,LUND P.Performance of planar freebreathing PEMFC at temperatures below freezing[J].Journal of Power Sources,2006,154(1):86-94.
  • 7KIM J,GOO Y,JANG H R.Temperature related study on PEM fuel cell[J].Science and Technology,2004,1:342-345.
  • 8MUKUNDAN R,KIM Y S,GARZON F,et al.Freeze/thaw effects in PEM fuel cells[J].Meet Abstr Electrochem Soc,2006,502:1 208.
  • 9CHO E A,KO J J,HA H Y,et al.Effects of water removal on the performance degradation of PEMFCs repetitively brought to < 0 ℃[J].J Electrochem Soc,2004,151(5):A 661-A 665.
  • 10YAN Q,TOGHIANI H,LEE Y W,et al.Effect of sub-freezing temperatures on a PEM fuel cell performance,startup and fuel cell components[J].Journal of Power Sources,2006,160(2):1 242-1 250.

共引文献4

同被引文献26

  • 1孙树成,俞红梅,侯俊波,王宏卫,明平文,衣宝廉.PEMFC在0℃以下环境启动的研究[J].电源技术,2007,31(8):626-629. 被引量:10
  • 2SUNDARESAN M, MOORE R M. Polymer electrolyte fuel cell stack thermal model to evaluate subfreezing startup [J]. J Power Sources,2005,145:534-545.
  • 3MAO L, WANG C Y, TABUCHI Y. A multiphase model for cold start of polymer electrolyte fuel cells[J]. J of the Electrochemical Society,2007,154(3):B341-B351.
  • 4MENG H. Numerical studies of cold-start phenomenon in PEM fu- el cells[J]. Electrochica Acta,2008,53:6521-6529.
  • 5LI Y C, XU S C, YANG Z G, et al. Experiment and simulation study on cold start of automotive PEMFC [C]//2011 international conference on electric information and control engineering. Wuhan: Huazhong Univ of Sci & Tech, 2011:2166-2170.
  • 6KHANDELWAL M, LEE S, MENCH M M.One-dimensional ther- mal model of cold-start in a polymer electrolyte fuel cell stack[J]. Journal of Power Sources, 2007, 172(2):816-830.
  • 7MENG H. A PEM fuel cell model for cold-start simulations[J]. J Power Sources,2008,178:141-150.
  • 8LI You-cai, XU Si-chuan, YANG Zhi-gang, et al. Experiment and simulation study on cold start of automotive PEMFC [J]. 2011 International Conference on Electric Information and Control Eng- ineering.Wuhan, China:IEEE, 2011 (4): 2166-2170.
  • 9SUNDARESAN M,MOORE R M. Polymer electrolyte fuel cell stack thermal model to evaluate subfreezing startup [J].J Power Sources, 2005,145:534-545.
  • 10KHANDELWAL M,LEE S,MENCH M M.One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack [J]. Journal of Power Sources, 2007, 172 (2):816-830.

引证文献5

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部