摘要
深圳市南山水厂一期设计规模为20×104m3/d,为保证供水水质达到直接饮用标准,采用预处理/强化常规处理/深度处理工艺,并对排泥水进行回用和污泥处理。详细介绍了水厂各构筑物的工艺参数及关键技术。运行实践表明,该工艺设计合理,出水水质达到了设计标准。
The design capacity of first stage project of Shenzhen Nanshan Waterworks is 20×10^m^3/d. The combined process of pretreatment, enhanced conventional treatment and advanced treatment is used and the reuse of the sludge water and the sludge disposal are simultaneously accomplished to en- sure that the water quality meets the standard of direct drinking. The main process parameters of different structures of the waterworks are introduced, and some key technologies are explained. The operation practice shows that the combined process has rational design, and the finished water quality reaches the design standard.
出处
《中国给水排水》
CAS
CSCD
北大核心
2009年第12期27-32,共6页
China Water & Wastewater
关键词
强化常规处理
深度处理
污泥处理
enhanced conventional treatment
advanced treatment
sludge disposal
