期刊文献+

氮化硅陶瓷的液相连接研究 被引量:1

Joining of Silicon Nitride Ceramics by Liquid Phase
下载PDF
导出
摘要 本文研究了用氧氮玻璃作为中间层材料连接氮化硅陶瓷.结果表明,在1600℃×30min、5MPa的外加压力条件下,氮化硅陶瓷的结合强度达到基体氮化硅陶瓷的57%.结合层内的结构与基体氨化硅十分相似,但是晶粒尺寸较细,两者结构上的一致性对于提高结合强度起着重要的作用. The joining of silicon nitride ceramics using oxynitride glass as the interlayer material wasstudied in this paper. The results showed that the bonding strength of joined silicon nitrideceramics was up to 57% of that of the silicon nitride ceramic matrix. The joint zone had the samemicrostructure as the ceramic matrix , but smaller grain size. The similarity in the microstructuretakes a great role in the increase of bonding strength.
出处 《无机材料学报》 SCIE EI CAS CSCD 北大核心 1998年第3期427-431,共5页 Journal of Inorganic Materials
关键词 强度 氮化硅陶瓷 陶瓷 液相连接 joining, silicon nitride, bonding strength
  • 相关文献

同被引文献28

  • 1翟阳,任家烈,庄丽君.用非晶态合金作中间层对Si_3N_4陶瓷进行扩散焊连接[J].金属学报,1994,30(8). 被引量:5
  • 2BATES C H.Joining of non-oxide ceramic for high temperature applications [J].Ceramic Bulletin,1990,69(3):350-356.
  • 3TILLMANN W.Heat-Resistant Active Brazing of Silicon Nitride[D].Aachen University of Technology,1992.
  • 4NAIDICH Y V.A volume-averaged two-phase model for solidification transport phenomena[C].Prong Surf Member Sci,1981,14:353.
  • 5NAIDICH Y V,ZHURAVLEV V S,CHUPRINA V G.Poroshkovaya[J].Metallurgiya,1983,131(11):2017-2020
  • 6KLOMP J T.Surface and interface of ceramic materials[J].Kluwer Academic,1989,11(2):385-388.
  • 7冼爱平.[D].中科院沈阳金属所,1995.
  • 8TILLMANN W,UGSCHEIDER E.Heat-resistant active brazing of silicon nitride [J].Welding Journal,1998(3):103~109.
  • 9KANG S,KIM H J.Design of high-temperature brazing alloys for ceramic-metal joints[J].Welding Journal 1995,9:289-294.
  • 10见山克己.SiN*Ni结合体の破断强度に及ぼすろぅ付け时の升温速度の影响[J].日本金属学会志,1996,60(5):497-503.

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部