期刊文献+

车轮外倾与前束对转向轮侧滑的影响分析 被引量:3

Analysis of the Impact of Wheel' s Camber and Toe- in to Turning Wheel's Side Skidding
下载PDF
导出
摘要 车轮侧滑会加剧轮胎磨损,影响车辆性能。为了减小这种不利影响,对转向轮进行受力分析、数学推导,得出转向轮侧滑与车轮外倾角、前束的关系公式,并进行了试验验证。实验结果表明:该公式可以用于调节转向轮的外倾角或前束。 The wheel' s side kidding quickens tyre wear and tear can influence vehicle' s performance. In order to weaken this negative influence, this paper through the force analysis, mathematic derivation, finds a formula about the relationship between camber,toe -in and side kidding,and then experiment is tested. The formula can be used in adjusting the camber or toe - in angle.
出处 《军事交通学院学报》 2009年第4期57-60,共4页 Journal of Military Transportation University
关键词 外倾角 前束角 侧向力 侧滑 camber angle toe - in angle side force side kidding
  • 相关文献

同被引文献18

  • 1王建强,苏建,贾正锐,李克强.汽车车轮侧滑量检测存在问题及对策研究[J].汽车技术,2004(7):30-32. 被引量:10
  • 2王霄峰.汽车底盘设计[M].北京:清华大学出版社,2010.
  • 3郭峰.轮胎磨损与车轮定位参数的研究与探讨[D].沈阳:东北大学机械工程与自动化学院,2008:54-60.
  • 4GUO K, REN L. A non-steady and non-linear tire mod- el under large lateral slip condition[J]. SAE Technical Paper Series, 2000, 2000-01-0358.
  • 5GUO K, REN L, LU D. On the non-steady comprehen- sive tire model associated with lateral slip turn slip and comber[C]//The 5th International Symposium on Ad vanced Vehicle Control. Ann Arbor, Michigan, August 22-24, 2000.
  • 6YANG X, MEDEPALLI S. Sensitivities of suspension bushings on vehicle impact harshness performances[J]. SAE Transactions, 2005, 114(5): 438-444.
  • 7HEGAZY S, RAHN[JAT H, HUSSAIN K. Multi- body dynamics in full-vehicle handling analysis under transient manoeuvre [J]. Vehicle System Dynamics, 2000(34) : 1-24.
  • 8安相璧,李树珉,马效.车轮定位与轮胎磨损关系分析[J].汽车工程学报,2001(2):30-32. 被引量:1
  • 9潘洪达,苏建,贾正锐,王建强.车轮存在外倾与前束力学特性的研究[J].中国公路学报,1998,11(S1):116-121. 被引量:1
  • 10王安顺,张景,施树明,张立斌.汽车转向轮侧滑及其影响因素的研究[J].中国公路学报,1998,11(S1):122-128. 被引量:11

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部