期刊文献+

高温作用后无机化学锚栓性能试验研究 被引量:4

Experimental study on the inorganic chemical anchor bolt property after high temperature effect
下载PDF
导出
摘要 考虑温度、冷却方式及静置时间的影响,对高温作用后无机化学锚栓的性能进行了试验研究,结果表明,随温度的升高,抗拔承载力先降低,后回升,再大幅度降低,自然冷却的抗拔承载力高于浇水冷却,随静置时间的推移,抗拔承载力略为降低。 Considered temperature, cooling form and stewing time influences, the property of inorganic chemical anchor bolt was studied experimentally. The result indicated that the withdrawal resistance bearing capacity decreased first, then recovery, then decreased at wide range with temperature increasing, the withdrawal resistance bearing capacity of natural cooling was higher than watering cooling, the withdrawal resistance bearing capacity reduced litter with stewing time traction.
作者 韩瑞昌 冼兰
出处 《山西建筑》 2009年第20期175-176,共2页 Shanxi Architecture
关键词 高温作用 无机化学锚栓 抗拔承载力 high temperature function, inorganic chemical anchor bolt, withdrawal resistance bearing capacity
  • 相关文献

参考文献6

二级参考文献35

共引文献430

同被引文献23

  • 1王晓利.无机化学药包锚固栓:中国,200420042008.6[P].2005-07-20.
  • 2王晓利.双锚锚栓装鼍:中国,200620078859[P].2007-05-16.
  • 3.GB3098.1-82紧固件机械性能--螺栓、螺钉和螺柱[S].
  • 4GB50007-2002.建筑地基基础设计规范[S].[S].,..
  • 5JGJ120-99.建筑基坑支护技术规程[S].[S].,..
  • 6JGJ145-2004,混凝土结构后锚固技术规程[S].
  • 7GB50367-2006,混凝土结构加固设计规范[S].
  • 8DG/TJ08-003-2000 建筑锚栓抗拉拔、抗剪性能试验方法[S].2000.
  • 9GB 50367-2006.混凝土结构加固设计规范[S],2006.
  • 10GB 50367-2006.混凝土结构加固设计规范[S],2006.

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部