摘要
凸轮轴表面磨损是造成凸轮轮失效的主要原因。目前,国内一些修理企业,多以换凸轮轴作为主要修理手段,这必然造成不必要浪费。本文讨论了几种目前国内条件下可行的,较理想的修复方法,并确定了凸轮轴表面修复的工艺过程,为解决生产实际问题提供了可靠的途径。
It is the wear of the cam spindle surface that the main cause of failure for camspindle. Up till the present moment, a number of internal repaired enterprise, it is the mainrepaired means, that have changed the cam spindle. This situahon causes to need not waste.It have bcen tested, what a few of repaired methods is fcasible and more ideal. and we havedetermined the repaired technology process of cam spindle wear surface. It supplies a relia-ble method to solve the practical problem.
出处
《北京建筑工程学院学报》
1998年第2期15-21,共7页
Journal of Beijing Institute of Civil Engineering and Architecture
关键词
汽车发动机
凸轮轴
磨损
修复
刷镀
堆焊
Cam Spindle
Wear
Repair
Brush plating
Resurfacing Welding