摘要
In order to control welding stress and distortion, a new welding with trailing peening method based on the electromagnetic hammer was developed. This method uses the idea of constant frequency pulse width modulation for designing the control circuit of peening force and peening freqneney. The peening force can be adjusted between 0 and 1 000 N and the peening frequency ranges from 0 to 25 Hz. Peening force is applied to the weld metal and the weld toe during the welding by peening head. The experiments show that the method is portable and flexible, and it can adjust the distribution state of welding residual stress, making grain refinement. When the peening force is changed to 700 N and the peening frequency to 3 Hz, both the transverse and longitudinal residual stresses will drop obviously.
In order to control welding stress and distortion, a new welding with trailing peening method based on the electromagnetic hammer was developed. This method uses the idea of constant frequency pulse width modulation for designing the control circuit of peening force and peening freqneney. The peening force can be adjusted between 0 and 1 000 N and the peening frequency ranges from 0 to 25 Hz. Peening force is applied to the weld metal and the weld toe during the welding by peening head. The experiments show that the method is portable and flexible, and it can adjust the distribution state of welding residual stress, making grain refinement. When the peening force is changed to 700 N and the peening frequency to 3 Hz, both the transverse and longitudinal residual stresses will drop obviously.
基金
The work was supported by the Natural Science Foundation of Hebei Province of China under Grant No. E2006000528.
