期刊文献+

PLASTIC ZONE OF SEMI-INFINITE CRACK IN PLANAR KAGOME AND TRIANGULAR LATTICES

PLASTIC ZONE OF SEMI-INFINITE CRACK IN PLANAR KAGOME AND TRIANGULAR LATTICES
下载PDF
导出
摘要 The fracture investigations of the planar lattices made of ductile cell walls are currently limited to bending-dominated hexagonal honeycomb. In this paper, the plastic zones of stretching-dominated lattices, including Kagome and triangular lattices, are estimated by analyzing their effective yield loci. The normalized in-plane yield loci of these two lattices are almost identical convex curves enclosed by 4 straight lines, which is almost independent of the relative density but is highly sensitive to the principal stress directions. Therefore, the plastic zones around the crack tip of Kagome and triangular are estimated to be quite different to those of the continuum solid and also hexagonal lattice. The plastic zones predictions by convex yield surfaces of both lattices are validated by FE calculations, although the shear lag region caused by non-local bending effect in the Kagome lattice enlarges the plastic zone in cases of small ratio of rp/l. The fracture investigations of the planar lattices made of ductile cell walls are currently limited to bending-dominated hexagonal honeycomb. In this paper, the plastic zones of stretching-dominated lattices, including Kagome and triangular lattices, are estimated by analyzing their effective yield loci. The normalized in-plane yield loci of these two lattices are almost identical convex curves enclosed by 4 straight lines, which is almost independent of the relative density but is highly sensitive to the principal stress directions. Therefore, the plastic zones around the crack tip of Kagome and triangular are estimated to be quite different to those of the continuum solid and also hexagonal lattice. The plastic zones predictions by convex yield surfaces of both lattices are validated by FE calculations, although the shear lag region caused by non-local bending effect in the Kagome lattice enlarges the plastic zone in cases of small ratio of rp/l.
出处 《Acta Mechanica Solida Sinica》 SCIE EI 2009年第3期213-225,共13页 固体力学学报(英文版)
基金 supported by the National Natural Science Foundation of China (No.10502027) the National Fundamental Research Program of China (No.G2006CB601202)
关键词 LATTICE yield surface crack tip plastic zone ANISOTROPIC lattice, yield surface, crack tip, plastic zone, anisotropic
  • 相关文献

参考文献10

  • 1I. Schmidt,N.A. Fleck.Ductile fracture of two-dimensional cellular structures – Dedicated to Prof.?Dr.-Ing.?D.?Gross on the occasion of his 60th birthday[J].International Journal of Fracture.2001(4)
  • 2Hutchinson,R.G.Mechanics of Lattice Materials[]..2004
  • 3Gibson L J,Ashby M F.Cellular Solids: Structure and Properties[]..1997
  • 4Chen C,Lu T J,Fleck N A.Effect of imperfections on the yielding of two-dimensional foams[].Journal of the Mechanics and Physics of Solids.1999
  • 5Evans A G.Lightweight materials and structures[].Materials Research Society Bulletin.2001
  • 6Wang A J,McDowell D L.In-plane stiffness and yield strength of periodic metal honeycombs[].Journal of Engineering Materials and Technology-Transactions of the Asme.2004
  • 7Hutchinson R G,Wicks N,Evans A G, et al.Kagome plate structures for actuation[].International Journal of Solids and Structures.2003
  • 8Fleck N A,Qiu X M.The damage tolerance of elastic-brittle two-dimensional isotropic lattices[].Journal of the Mechanics and Physics of Solids.2007
  • 9Quintana Alonso,I,Fleck,NA.Damage tolerance of an elastic-brittle diamond-celled honeycomb[].Scripta Materialia.2007
  • 10Deshpande V S et al.Journal of the Mechanics and Physics of Solids[]..2000

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部