期刊文献+

电磁比例多路换向阀在微调区间的静态特性及仿真 被引量:1

Static Characteristics and Simulation of the Electro Magnetic Proportional Multi-way Direction Valve in the Scope of Micro-regulation
下载PDF
导出
摘要 根据电磁比例多路换向阀的结构及工作原理,建立其微调区间的静态特性数学模型,并借助MATLAB语言进行计算机仿真.结果表明,电磁比例多路换向阀的微调特性良好,先导阀输入电流与多路阀输出流量接近线性比例关系,有利于工程机械的精确控制. According to the structure and working principles of electro magnetic proportional multi-way direction valve, its mathematical model with static characteristics in the scope of micro-regulation was set up, and MATLAB language was employed in computer simulation, with the result that the electro magnetic proportional multi-way direction valve had good micro-regulation characteristics, and there was a linear proportion relationship between the input electric current of the pilot valve and output flow rate of the multi-way direction valve, which was advantageous for the accurate controlling of engineering mechanism.
作者 王素 胡国清
出处 《集美大学学报(自然科学版)》 CAS 2009年第3期283-287,共5页 Journal of Jimei University:Natural Science
基金 福建省科技厅重点项目(2006H0032)
关键词 电磁比例多路换向阀 静态特性 数学模型 仿真 electro magnetic proportional multi-way direction valve static characteristics mathemati- cal model simulation
  • 相关文献

参考文献8

二级参考文献49

  • 1王庆丰,魏建华,吴根茂,张彦廷.工程机械液压控制技术的研究进展与展望[J].机械工程学报,2003,39(12):51-56. 被引量:80
  • 2苗建中,郑云川.螺绞插装式高速开关阀[J].液压与气动,1993,17(6):29-30. 被引量:23
  • 3黄宗益.工程机械机电一体化、机器人化[J].中国机械工程,1996,7(3):64-66. 被引量:24
  • 4俞宗强,刘庆和.高速开关阀电液控制系统的特性研究[J].工程机械,1990,21(1):40-44. 被引量:9
  • 5吴根茂.新编实用电液比例技术.杭州:国家电液控制工程技术研究中心讲义[Z].,2004..
  • 6Rextoth Bosch Group.行走机械用液压及电子元器件(RD29224/02.03)[Z].,..
  • 7Husco International Inc.. Hydraulic control valve system with non-shuttle pressure compensator. US P 5,落 890,362, 1999.04.06
  • 8Henke R W. Evolution of load-sensing hydraulics. Diesel Progress International Edition, 1998, 17(4): 53~55
  • 9Yasuo S, Takeshi N, Kazuhiro T. Design method of an intelligent oil-hydraulic system. In: Proceedings of the 2002 IEEE International Symposium on Intelligent Control, Vancouver, Canada. 2002, 10: 626~630
  • 10Backé W. Design systematics and performance of cartridge valve controls. In: International Conference on Fluid Power, Tampere, Finland. 1987, 3:1~48

共引文献181

同被引文献18

  • 1高峰,潘双夏.液压挖掘机负流量负荷传感控制策略[J].农业机械学报,2005,36(7):111-113. 被引量:9
  • 2俞浙青,吴根茂,路甬祥,郑庆良.多路阀的应用分析与发展展望[J].工程机械,1995,26(9):21-24. 被引量:6
  • 3杨华勇,曹剑,徐兵,吴根茂.多路换向阀的发展历程与研究展望[J].机械工程学报,2005,41(10):1-5. 被引量:71
  • 4齐俊.关于中国工程机械行业发展形势和任务的报告[R].中国工程机械工业协会,2010.
  • 5吴根茂.新编实用电液比例技术[M].杭州:国家电液控制工程技术中心技术研究中心讲义,2004.
  • 6Henke R W. Evolution of load-sensing hydraulics [ J ]. Diesel Progress International Edition. 1998,17 (4) :53 - 55.
  • 7Backc W. Design systematics and performance of cartridge valve controls [ C ]. International conference on fluid power, 1987,3:1 - 48.
  • 8Jansson A, Palmberg J. Separate controls of meter-in and meter-out orifices in mobile hydraulic systems [ J ]. SAE transactions. 1990,99 (2) : 377 - 383.
  • 9Hu H, Zhang Q. Realization of programmable control using a set of individually controlled electrohydraulic valves [ J ]. International Journal of Fluid Power. 2002,3 (2) :29 - 34.
  • 10Marc E M. Control of mobile hydraulic crane [ Z ]. In : Proc. of first FPNI-PhD symposium, Hamburg,2000:475 - 483.

引证文献1

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部