摘要
关于Ⅰ型、Ⅱ型曲柄摇杆机构,通过引入"辅助圆"的新概念,以曲柄固定铰链中心点A的可行区域理论为重要基础,在以摇杆摆角ψ为唯一前提参数条件下,得到了关于极位夹角θ、行程速比系数K取值范围及其最大值的一系列重要结论,该系列结论对机构分析和设计具有一定的指导意义.
By introducing a new concept "Auxiliary Circle" about Type Ⅰ and Type Ⅱ crank-rocker mechanisims, based on the dwell district theory of crank fixed hinge center A, and on the precondition of the only parameter of the rocker angle ψ a series of important conclusions about the range and the maximum value of the crank angle θ between extreme positions and the advence-to return-time ratio K was obtained. These conclusions will have certain guiding significane for mechanism analysis and mechanism design.
出处
《集美大学学报(自然科学版)》
CAS
2009年第3期294-298,共5页
Journal of Jimei University:Natural Science
基金
福建省自然科学基金资助项目(E0610022)
关键词
曲柄摇杆机构
辅助圆
极位夹角
行程速比系数
可行区域
crank-rocker mechanism
auxiliary circle
crank angle between extreme positions
advance-to return-time ratio
dwell district