期刊文献+

双峰时效处理对7055铝合金组织和性能的影响

Effects of Two- Peak Aging Treatment on Microstructure and Mechanical Properties of 7055 Aluminum Alloy
下载PDF
导出
摘要 研究了双峰时效对7055铝合金组织和性能的影响.结果表明:7055铝合金采用双峰时效制度处理时,其性能峰值出现在135℃/16h+190℃/10min,这时,抗拉强度、屈服强度、延伸率分别达到695 MPa、658 MPa、14%. The effects of two-peak aging treatment on microstructure and mechanical properties of 7055 aluminum alloy were investigated. Results indicate when the peak quantity property of 7055 aluminum alloy property turn up, two-peak aging treatment is 135 ℃/16h+ 190℃/10min. Then, the yield strength is 695 MPa,the ultimate strength is 658 MPa ,and the elongation is 14%.
出处 《邵阳学院学报(自然科学版)》 2009年第2期32-34,共3页 Journal of Shaoyang University:Natural Science Edition
基金 湖南省教育厅青年项目(06B084) 湖南省教育厅一般项目(O7C678)
关键词 7055铝合金 双峰时效 组织 性能 7055 aluminum alloy two-peak aging treatment microstructure property
  • 相关文献

参考文献4

二级参考文献43

  • 1李杰,尹志民,王涛,李念奎.固溶-单级时效处理对7055铝合金力学和电学性能的影响[J].轻合金加工技术,2004,32(11):39-43. 被引量:15
  • 2焦汇胜,李春志.Al-Zn-Mg合金中沉淀相的高分辨研究[J].航空材料学报,1995,15(1):35-38. 被引量:1
  • 3李成功 巫世杰 等.先进铝合金在航空航天工业中的应用与发展[J].中国有色金属学报,2002,12(1):14-21.
  • 4Shih H C,Metall Mater Trans A,1996年,27卷,2479页
  • 5胡德林,三元合金相图,1995年,98页
  • 6武恭,铝及铝合金材料手册,1994年,256页
  • 7金相图谱编写组,变形铝合金金相图谱,1975年,90页
  • 8Joshi A,Shastry C R,Levy M.Effect of heat treatment on solute concentration at grain boundaries in 7075 aluminum alloy[J].Met Trans,1981,12A (6):1081-1088.
  • 9Cina B M.Reducing the susceptibility of alloys,particularly aluminum alloys,to stress corrosion cracking[P].U S Patent:3856584,1974.
  • 10Dahn N C,Rajan K,Wallace W.TEM study of microstructural change during retrogression and reageing in 7075 aluminum[J].Mat Trans A,1983,14(9) :1843-1850.

共引文献128

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部