摘要
通过对筒形件壳体冷冲压成形工艺和成形关键的分析,制定了相应的工艺路线及有效的解决方案;通过MSC软件模拟成形过程并设计相关模具;最后通过实验成功验证了该零件冲压成形的可行性,为该类零件的挤压成形开辟了新的道路。
The cold stamping process and the key component of forming was analyzed, the corresponding route and effective technology solutions were formulated, the forming process was simulated by MSC and related-mold was designed. The feasibility of stamping parts was successfully verified by experiment. It give a new way to punch of this parts.
出处
《热加工工艺》
CSCD
北大核心
2009年第13期154-155,159,共3页
Hot Working Technology
基金
国家自然科学基金资助项目(50735005)
关键词
筒形件壳体
冷冲压工艺
数值模拟
模具设计
tube-shaped pieces of shell
cold stamping process
numerical simulation
die design
