期刊文献+

1Cr21Ni5Ti双相不锈钢组织稳定性及对冲击韧性的影响 被引量:2

Microstructural Stability and Its Influence on Impact Energy in 1Cr21Ni5Ti Duplex Stainless Steel
原文传递
导出
摘要 用600℃时效微观组织变化和冲击韧性的变化评价了1Cr21Ni5Ti双相不锈钢的稳定性。结果表明:1Cr21Ni5Ti双相不锈钢稳定性对Ti/C极为敏感,低Ti/C(Ti/C=4.08)钢600℃时效快速析出富Cr的M23C6碳化物,降低奥氏体内的Cr和C含量致使时效后冷却过程中奥氏体转变为马氏体,并伴随着冲击韧性的严重恶化;而Ti/C适度的钢明显抑制了M23C6碳化物的析出和随后奥氏体向马氏体转变,长时间时效后冲击韧性高出低Ti/C钢近一倍。 The stability of 1Cr21NiSTi duolex stainless steel, asked at 600℃, has been evaluated through the microstructural evolution and impact energy change. The results have indicated that the stability of 1Cr21NiSTi duplex stainless steel was highly sensitive to ratio of Ti/C. Due to rapid precipitation of Cr-rich M23C5 carbide in the steel with lower Ti/C (Ti/C=4.08), Cr and C contents in austenitic phase had reduced to such low levels that the austenitic phase transformed to martensite on cooling from aging temperature to ambient temperature, led to the impact energy deteriorating. In contrast. Cr-rich M23C5 carbide precipitation had been depressed in the steel with moderate Ti/C (Ti/C=5. 21), and accordingly, ausxenite transformation to marxensite had been arresxed on cooling from aging temperature. Finally, after long time aging the impact energy of the steel with Ti/C=5. 21 is nearly two times that of steel with Ti/C=4. 08.
出处 《物理测试》 CAS 2009年第4期15-18,共4页 Physics Examination and Testing
关键词 1Cr21Ni5Ti钢 时效 稳定性 冲击韧性 1Cr21NiSTi steel agingl stabilitys impact energy
  • 相关文献

参考文献4

二级参考文献22

  • 1陈荣仙 红野 等.钛对1Cr21Ni5Ti双相不锈钢晶闸腐蚀敏感性影响的研究[M].,1983..
  • 2陈兆生.1Cr21Ni5Ti双相不锈钢应用情况介绍[M].,2000..
  • 3红野 陈荣仙 等.1Cr21Ni5Ti双相不锈钢的脆化倾向[M].,1983..
  • 4(苏).Н.Я.索科尔.双相不锈钢[M].原子能出版社,1979..
  • 5王黎云.1Cr21Ni5Ti脆化现象的探讨[M].,2000..
  • 6(苏联)и.я.索科尔.《双相不锈钢》[M].,..
  • 7吴玖 等.《双相不锈钢》[M].,..
  • 8(苏联)ю.М..чцжцквX21H5T(K811).《双相不锈钢的压力加工》[M].,..
  • 9Maysa Terada,Marcio F. Hupalo,Isolda Costa,Angelo F. Padilha.Effect of alpha prime due to 475?°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels[J].Journal of Materials Science.2008(2)
  • 10L. Duprez,B. C. Cooman,N. Akdut.Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation[J].Metallurgical and Materials Transactions A.2002(7)

共引文献5

同被引文献12

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部