期刊文献+

钢质管道内外环氧粉末喷涂一次成型新工艺 被引量:3

Improved Film Once-forming Process for Internal & External Fusion Bonded Epoxy Powder on Steel Pipes
下载PDF
导出
摘要 针对钢管内外环氧粉末工艺流程存在的缺陷,提出了一种全新的内外环氧粉末一次成膜工艺。介绍了环氧粉末内外喷涂技术,从粉末喷涂速度、成膜厚度、加热方式等方面分析了钢管内外环氧粉末喷涂一次成型新工艺的可行性,提出了环氧粉末内外喷涂新工艺流程。该工艺既可以降低"先内后外"或"先外后内"工艺对已经成型外(内)环氧粉末涂层造成的损坏,又可以延长涂层寿命,降低腐蚀破坏的概率。 Aiming at the defects existed in the process of internal&external fusion bonded epoxy powder(FBE) on steel pipes,an improved new film forming process is proposed.The paper introduces FBE applying process for internal&external pipes,analyzes the feasibility in film forming process from applying velocity of powder,filming thickness and heating method and presents a new technological process.The process can eliminate the damage to the formed FBE film on steel pipes resulting from the process of'inner applying before outer applying'or'outer applying before inner applying',also elongate service life of the coating and decrease corrosion and damage probability.
作者 乔军平
出处 《油气储运》 CAS 北大核心 2009年第7期76-78,共3页 Oil & Gas Storage and Transportation
关键词 钢质管道 环氧粉末 内外防腐层 一次成膜 工艺 steel pipeline,FBE powder,internal and external coating,film once-forming,process
  • 相关文献

参考文献2

二级参考文献6

  • 1奥田聪.耐腐蚀塑料及其耐腐蚀性研究新动向[M].北京:化学工业出版社,1982.33-77.
  • 2[1]P & G J. staff: Internal Pipe coating are A wise Investment, P & G J, 1992, 3
  • 3[3]P & G J. staff: Internal Pipe coating are A wise Investment, P & G J, 1993,3
  • 4[8]API RP 5L2 - 1987《Recommended Practice for Internal Coating of Line Pipe for Non - Corrosive Gas Transmission Service.
  • 5沈玉全,有机化合物结构确定,1987年
  • 6奥田聪,耐腐蚀塑料及其耐腐蚀性研究新动向,1982年,33页

共引文献7

同被引文献16

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部