摘要
利用Axiovert 25型金相显微镜对高纯铝箔制备过程中的组织进行了观察和分析。结果表明,轧制变形量越大,高纯铝箔的再结晶组织越细小;高纯铝箔的再结晶过程经历了回复、再结晶和晶粒长大三个阶段;高纯铝箔开始再结晶温度在200℃~230℃之间。
In this paper, Axiovert 25 type metallographic microscope was used to observe and analyze the preparation process of high-purity aluminum foils. The results showed that the greater the rolling deformation rate, the smaller of the recrystaUization texture of high purity aluminum foil. The recrystallizafion process of high purity aluminum foil experienced three stages： reply, recrystallization and grain growth. Beginning reerystallization temperature of high purity aluminum foil is 200℃ - 230℃.
出处
《轻合金加工技术》
CAS
北大核心
2009年第7期25-26,58,共3页
Light Alloy Fabrication Technology
关键词
高纯铝箔
组织
轧制
再结晶
high-purity aluminum foil
texture
rolling
recrystallization
