摘要
针对防锈铝合金LF21材料，采用Ф4mm整体硬质合金立铣刀，在主轴转速为8～40kr／min、每齿进给量为0．03～0．07mm、背吃刀量为0．5～2．5mm范围内进行单因素和多因素的高速铣削加工试验，研究了切削参数的变化对铣削力的影响规律和原因。应用相关系数确定了切削参数对各切削分力的影响程度，指出了精密加工薄壁、超薄腹板等弱刚度特征结构时切削参数选择的一般原则。
Using 4mm diameter straight end mill H10F,uncoated carbide tool,the effect of cutting parameters on milling force was analyzed by the one--way and multi--way experiments of milling forces in high speed machining of LF21 which were carried out with spindle speeds from 8 to 40kr/min,feed per tooth from 0. 03 to 0.07mm and depth of cut from 0. 5 to 2. 5mm. The correlation coefficient was used to analyze the effect of cutting parameters on component force （Fx ,Fy, Fx）. The approach for machining weak rigidity workpieces was presented.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
2009年第14期1660-1664,共5页
China Mechanical Engineering
基金
国家部委"十一五"预研基金资助项目(62301090103)
关键词
LF21
铝合金
铣削力
高速铣削
相关系数
LF21
aluminum alloy
milling force
high-- speed milling
correlation coefficient
