期刊文献+

抑尘剂添加装置的设计研究 被引量:3

Researched on Additive Equipment of Dust Suppression
下载PDF
导出
摘要 通过压力分析和理论计算,设计出一种抑尘剂添加装置,装置主要包括进水管路、药剂添加罐、均匀混合段3部分,该装置结构简单、使用方便,可使水与药剂混合更加均匀,经现场使用除尘效果十分明显。 Throwing equipment of dust suppressant based on dust suppression in mine at present is designed. The structure ,analyzed energy lossing and calculate the flow of the equipment are intrduced. The equipment mostly contained infalled pipeline, medicament accession pot and counterpoise mixed section, it' s a convenient facility because of simple structure. It makes the water mixed more uniformity with dust suppressant and optimized the effects of dust removal.
出处 《煤矿机械》 北大核心 2009年第8期13-15,共3页 Coal Mine Machinery
基金 国家科技支撑计划资助项目(2006BAK03B01) 2008年度河北省自然科学基金资助项目(E2008000547)
关键词 抑尘剂 添加装置 流量计算 dust suppressant throwing equipment flux computation
  • 相关文献

参考文献1

二级参考文献6

  • 1Jun Yang, Daniel Y Kwok. Analytical Treatment of Flow in Infinitely Extended Circular Microchannels and the Effect of Slippage to Increase Flow Efficiency[J]. Micromech. Microeng, 2003, ( 13 ) : 115 - 123.
  • 2Song Y J, Zhao T S. Modeling and Testing of a Thermallydriven Phase-change Nonmechanical Micropump [J]. Micromech. Microeng ,2001, ( 11 ).
  • 3Pfrathler J N. Advances in Thermal Modeling of Electronic Components and Systems [ M]. vol II. New Yurk:ASME Press, 1990.
  • 4Yang G M, Li D Q, Masliyah J H. 1998 Modeling Forced Liquid Convection in Rectangular Microchannal with Electrokinetic Effect Int[ C]. J Heat Mass Transfer, 1998,41.
  • 5Madou M. Fundamental of Microfabrication [ M ] , New Yurk-CRC Press, 1997.
  • 6刘惠枝 舒宏纪.边界层理论[M].北京:人民交通出版社,1989..

共引文献4

同被引文献9

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部