期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Preparation of TiAlN/ZrN and TiCrN/ZrN multilayers by RF magnetron sputtering 被引量：6

Preparation of TiAlN/ZrN and TiCrN/ZrN multilayers by RF magnetron sputtering
下载PDF
导出
摘要 Titanium-based nitride coatings on cutting tools,press molds and dies can be used to prolong their life cycle because of their superior corrosion and oxidation resistance.TiAlN/ZrN and TiCrN/ZrN multilayer coatings were prepared by RF magnetron sputtering,and their microstructural evolution and corrosion resistance during heat treatment were investigated.The TiAlN/ZrN and TiCrN/ZrN multilayer coatings are degraded by heating up to 600 ℃ with the formation of oxides particles on the surface.During the heat treatment,the TiCrN/ZrN and TiAlN/ZrN multilayer coatings show the lowest corrosion current density and the highest polarization resistance at temperature range of 400-500 ℃.Consequently,the TiAlN/ZrN and TiCrN/ZrN multilayer coatings show good corrosion resistance at temperature range of 400-500 ℃ during heating. Titanium-based nitride coatings on cutting tools, press molds and dies can be used to prolong their life cycle because of their superior corrosion and oxidation resistance. TiAlN/ZrN and TiCrN/ZrN multilayer coatings were prepared by RF magnetron sputtering, and their microstructural evolution and corrosion resistance during beat treatment were investigated. The TiAlN/ZrN and TiCrN/ZrN multilayer coatings are degraded by heating up to 600 ℃ with the formation of oxides particles on the surface. During the heat treatment, the TiCrN/ZrN and TiAlN/ZrN multilayer coatings show the lowest corrosion current density and the highest polarization resistance at temperature range of 400-500℃. Consequently, the TiAlN/ZrN and TiCrN/ZrN multilayer coatings show good corrosion resistance at temperature range of 400-500 ℃ during heating.
作者 Jong-Kook LEE G won-Seung YANG
机构地区 Department of Advanced Materials Engineering BK
出处 《中国有色金属学会会刊：英文版》 EI CSCD 2009年第4期795-799,共5页 Transactions of Nonferrous Metals Society of China
关键词 射频磁控溅射 溅射制备 氮化锆 多层膜 钛 铝 耐腐蚀性 腐蚀电流密度 TiCrN/ZrN TiAlN/ZrN multilayer coating RF magnetron sputtering
分类号 TB383.2 [一般工业技术—材料科学与工程]
  • 相关文献

参考文献18

  • 1DANISMAN S,SAVAS S.The effect of ceramic coating on corrosion and wear behaviour[J].Tribology in Industry,2005,27:41-48.
  • 2YONGQING F,HEJUN D,SAM Z.Deposition of TiN layer on TiNi thin films to improve surface properties[J].Surface and Coating Technology,2003,167:129-136.
  • 3STEYER P,MENDIBIDE C,MILLET J P,MAZILLE H.Improvement of high temperature corrosion resistance of tool steels by nanostructured PVD coating[J].Mater Sci Forum,2003,426:2503-2508.
  • 4CARVALHO S,REBOUTA L,CAVALEIRO A,ROCHA L,GOMEZ J,ALVES E.Microstructure and mechanical properties of nanocomposite TiAlN coatings[J].Thin Solid Films,2001,398:391-396.
  • 5DOBRZANSKI L A,LUKASZKOWICZ K,MIKULA J,PAKULA D.Structure and corrosion resistance of gradient and multilayer coatings[J].Journal of Achievements in Materials and Manufacturing Engineering,2006,18:75-78.
  • 6DING X,TAN A L K,ZENG X T,WANG C,YUE T,SUN C Q.Corrosion resistance of CrAlN and TiAlN coating deposited by lateral rotating cathode arc[J].Thin Solid Films,2008,516:5716-5720.
  • 7YANG Q,SEO D Y,ZHAO L R,ZENG X T.Erosion resistance performance of magnetron sputtering deposited TiAlN coatings[J].Surface and Coatings Technology,2004,188/189:168-173.
  • 8ZHANG G A,YAN P X,WANG P,CHEN Y M,ZHANG J Y.The structure and tribological behaviors of CrN and Cr-Ti-N coatings[J].Applied Surface Science,2007,253:7353-7359.
  • 9MO J L,ZHU M H,LEI B,LENG Y X,HUANG N.Comparison of tribological behaviours of AlCrN and TiAlN coatings-eposited by physical vapor deposition[J].Wear,2007,263:1423-1429.
  • 10DING X Z,ZENG X T.Structural,mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron sputtering[J].Surface and Coatings Technology,2005,200:1372-1376.

同被引文献55

  • 1ChengmingLi,QiHe,GangLin,XiaojunSunt,WeizhongTang,FanxiuLu.TiN/CrN multilayered hard coatings with TiCrN interlayer deposited by a filtered cathodic vacuum arc technique[J].Journal of University of Science and Technology Beijing,2004,11(5):420-424. 被引量：1
  • 2张华丽,张飞虎.基于Nano Indenter的纳米刻划性能试验研究[J].机械与电子,2006,24(3):3-6. 被引量：7
  • 3刘建华,邓建新,张庆余.TiAlN涂层刀具的发展与应用[J].工具技术,2006,40(4):9-13. 被引量：39
  • 4KLOCKE F, KRIEG F T. Coated tools for metal cutting-features and applications[J]. CIRP Annals-Manufacturing Technology, 1999,48(2): 515-525.
  • 5DENG J" X, LIU J H, DING Z L, et al. Unlubricated friction and wear behaviors of ZrN coatings against hardened steel[J]. Materi- als ~ Design, 2008,29(9): 1828-1834.
  • 6KANG M C, JE S K, KIM K H, et al. Cutting performance of CrN-based coatings tool deposited by hybrid coating method for micro drilling applications[J]. Surface and Coatings Technology, 2008,202(22-23), 5629-5632.
  • 7SCHULZ H, DORR J, RASS I J, et al. Performance of oxide PVD-coatings in dry cutting operations[J].Surface and Coatings Technology, 2001,146 - 147 : 480- 485.
  • 8ANTUNES R A, RODAS A C D, LIMA N B, et al. Study of the corrosion resistance and in vitro biocompatibility of PVD TiCN- coated AISI 316L austenitic stainless steel for orthopedic applica- tions[J]. Surface and Coatings Technology, 2010,205(7): 2074 -2081.
  • 9LEONI M, SCARDI P, ROSSI S, et al. (Ti,Cr)N and Ti/TiN PVD coatings on 304 stainless steel substrates: texture and resid- ual stress[J]. Thin Solid Films, 1999,345(2) : 263-269.
  • 10PANJAN P, NAVINSEK B, CVELBAR A, et al. Oxidation of TiN, ZrN, TiZrN, CrN, TiCrN and TiN/CrN multilayer hard coatings reactively sputtered at low temperature[J]. Thin Solid Films, 1996,281-282(1-2): 298-301.

引证文献6

二级引证文献8

中国有色金属学会会刊：英文版
2009年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部