摘要
1#干熄焦汽轮机组投运一年后,出现了润滑油水分超标,指标从0%增长至4.4%(标准为0.2%以下),最终造成油乳化现象,给汽机运行带来油膜形成不好、油压偏低、轴承振动大及调节系统卡阻等危害,文章对该问题进行分析并提出有效措施。
The lubricating oil's moisture content of the 1 # CDQ turbine exceeded the standard just one year after the operation. The moisture content in lubricating oil increased from 0% to 4.4% ( The standard is below 0.2% ). The oil emulsified at last. This phenomenon brought great harm to turbine, such as the oil - film formation is not good,low oil pressure, large bearing vibration, adjusting system obstacle. This article analyzes these above - mentioned problems and proposes effective measures.
出处
《包钢科技》
2009年第3期67-68,75,共3页
Science & Technology of Baotou Steel
关键词
干熄焦汽轮机
润滑油
蒸汽
泄漏
乳化
coke dry quenching steam turbine
lubricating oil
steam
leakage
emulsify