期刊文献+

硫化钴精矿还原浸出高锰钴土矿的工艺研究 被引量:5

RESEARCH ON REDUCTION-LEACHING EARTHY COBALTOF HIGH-MANGANESE WITH COBALT SULFIDE CONCENTRATE
下载PDF
导出
摘要 在钴土矿还原浸出时加入一定量的硫化钴精矿代替SO2是可行的,正交试验及条件试验表明,在一定的技术条件下钴的浸出率可达85%,锰的浸出率大于90%。 The experimental research proved that is appropriate to append a proper quantity of cobalt sulfide concentrate instead of SO2 for reduction when the earthy cobalt was leached. The orthogonal experiment and conditions experiment shows the leaching rate of 85% for cobalt and that of over 90% for manganese can be reached under the proper technological condition.
出处 《矿产保护与利用》 1998年第4期32-35,共4页 Conservation and Utilization of Mineral Resources
关键词 高锰钴土矿 还原浸出 正交试验 硫化钴精矿 earthy cobalt with high-manganese, reduction leaching, orthogonal experiment, ratios of ore variety, cobalt, manganese, cobalt sulfide concentrate
  • 相关文献

参考文献2

共引文献8

同被引文献33

  • 1陈晓洪,傅崇说.海洋多金属结核还原浸出动力学[J].有色金属,1994,46(2):44-48. 被引量:2
  • 2陈晓洪,傅崇说.稀盐酸中用锌精矿还原浸出锰结核[J].中南矿冶学院学报,1994,25(1):39-43. 被引量:3
  • 3傅丽荣,李嘉诚,唐林生.海洋锰结核酸性还原浸出的研究[J].青岛化工学院学报(自然科学版),1996,17(1):32-33. 被引量:4
  • 4肖华利.株冶回收锗技术的变革与展望[J].有色冶炼,1996,25(6):54-57. 被引量:7
  • 5张义忠 谢刚 李荣兴 杨棣.从铜钴尾矿中提钴的浸出实验研究.中国稀土学报,2008,26:132-137.
  • 6刘中清.[D].湖南长沙:中南大学,2000,3.
  • 7Matjie R H,Mdleleni M M, Scurrell M S, et al. Extraction of Cobalt(II)From An Ammonium Nitrate-containing Leach Liquor by An Ammonium Salt of Di(2-ethylhexyl)phos- phoric Acid[J]. Minerals Engineering, 2003,16 (1C) : 1013 1017 .
  • 8Rane M V, Bafna V H, Sadanandam R, et al. Recovery of High Purity Cobalt From Spent Ammonia Carcker Catalyst [J]. Hydrometallurgy, 2005,77(3/4) : 247 251.
  • 9Swain Basudev, Jeong Jinki, Lee Jae-chun. Development of Process Flow Sheet for Recovery of High Pure Cobalt From Sulfate Leach Liquor of LIB Industry Waste: A Mathemati- cal Model Correlation to Predict Optimum Operational Con- ditions[J]. Separation and Purification Technology, 2008, 63(2) :360-369.
  • 10王宗毅.钴土矿还原酸浸的研究[J].云南冶金,1982(3):52-57.

引证文献5

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部