期刊文献+

异种钢焊接性的研究现状和进展 被引量:19

Present Research and Trends in the Dissimilar Steel Weldability
下载PDF
导出
摘要 从焊缝金属、熔合区的组织特征、断口形态、碳迁移、氢行为、应力应变状态和焊后热处理等几个方面,对国内外在异种钢焊接性方面的研究成果进行了综述。 This paper reviewed the present research and development trends of the weldability of dissimilar steel welding in home and abroad.It included weld metal,microstructural feature of the weld bond fracture,morphology,carbon migration,hydrogen behavior,stress and strain state,and postweld heat treatment,etc..
出处 《水利电力机械》 1998年第3期42-47,共6页 Water Conservancy & Electric Power Machinery
基金 武汉市青年科技晨光计划项目
关键词 异种钢 焊接 焊接性 接头区 Dissimilar Steel Weldiong Weldability Connect Zone
  • 相关文献

参考文献39

  • 1Lundin. CD. Dissimilar metal melds-transition joints literature review.Welding Journal,1982,61(2):58-s.
  • 2Faher. G and Gooch.T G.Welded joints between stainless and low allou steels;current position.Welding in the World,1982,20(5/6):87.
  • 3根本正 佐佐术良一 幡谷文男.异种金属溶接继手の高温强度[J].溶接学会志,1974,32(7):595-595.
  • 4Schimmoeler.H A.and Ruge.J L.Estimation of residual stresses in reactor pressure vessle steel specimens clad by stainless strip electrodes.Residual Stress in Welded Construction and Their Effects.Vol,1,(A Intemational Conference)London,15-17 Nov,1977.
  • 5丛欣滋.铁素体-奥氏体异种钢接头高温失效原因的分析[J].焊接学报,1989,10(1):19-29. 被引量:20
  • 6Delong. W T. Ferrite in austenitic stainless stell weld metal Welding Journal ,1974,53(7):273-286.
  • 7Suutala. N. Effect of manganese and nitrogen on the solidifcation mode in austenitic stainless steel welds. Metallurgical Transaction A, 1982.13(12):2121.
  • 8潘春旭,朱凤艳,陈雁荡.奥氏体不锈钢焊缝组织和偏析的电镜研究[J].武汉水运工程学院学报,1990,14(4):419-424. 被引量:5
  • 9Savage.W.Nippes.End Szekeres.E A Study of weld iterface phenomena in a low alloy steel.Welding Journal,1976,55(9):260.
  • 10Pan (潘春旭). C, Wang. R, Gui J.et al. Direct TEM observation of microstructures of the austenitic/carbon steel welded joint.Journal of Matetials Science,1990,25(7):3281.

二级参考文献15

  • 1张汉谦,吴宇,王宝,陆文雄.熔化焊接头特征区域研究[J].材料科学与工艺,1994,2(3):99-103. 被引量:3
  • 2潘春旭,沈棣华,张志慧.异种钢焊接接头显微组织在高温服役中的转变[J].电子显微学报,1994,13(2):121-124. 被引量:9
  • 3平修二,金属材料的高温强度理论设计,1983年
  • 4忻云彪,压力容器,1992年,9卷,2期,112页
  • 5潘春旭,J Mater Sci,1990年,25卷,7期,3281页
  • 6邵潭华,焊接学报,1988年,9卷,1期,10页
  • 7何康生,异种金属焊接,1986年
  • 8潘春旭,J Materials Sci,1990年,25卷,7期,3281页
  • 9钱昌黔,耐热钢焊接,1988年
  • 10褚武扬,氢损伤与滞后断裂,1988年

共引文献71

同被引文献134

引证文献19

二级引证文献70

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部