期刊文献+

一种基于点云数据的直接分层算法 被引量:4

A Direct Slicing Algorithm Based on the Point Clouds Data
下载PDF
导出
摘要 点云数据重建存在点与点之间几何拓扑关系建立困难和大量冗余数据两大难点.为实现数据的精确压缩,简化点与点之间拓扑结构的建立,采用基于最小距离关联点对的线面截交算法和截面轮廓数据的八方向编码追踪算法对点云数据进行直接分层处理,用实例验证了该方法的可行性. In the foundation of geometry topology relation between points each Other and being many redundancy data often exist two great difficulties in the process of reconstruction of scattered data. In order to realize precise compression of scattered data and simplify the establishing process of pointpoint geometry topology relation, the line-surface intersection algorithm based on a pair of the least distance relative points and the eight-direction contour tracing algorithm of the cross-section data are used to dispose the scattered data by means of direct slicing, and the example proves that the method is effective.
作者 王亚美 赵萍
出处 《沈阳理工大学学报》 CAS 2009年第3期39-41,共3页 Journal of Shenyang Ligong University
关键词 反求工程 分层算法 轮廓追踪算法 曲面重构 reverse engineering slice algorithm contour tracing algorithm curved surface reconstruction
  • 相关文献

参考文献5

  • 1张舜德,朱东波,卢秉恒.反求工程中三维几何形状测量及数据预处理[J].机电工程技术,2001,30(1):7-10. 被引量:59
  • 2Yin Jinxing, Chen Guanlong, Lin Zhongqin. New muhiresolution modeling techniques in CAD [ J ]. Computer-Aided Design, 2006, 38 (2) :134-142.
  • 3Lorensen W, Cline H. Marching Cubes: A High Resolution 3D Surface Construction Algorithm [ J]. CAD, 2004,24 ( 7 ) : 163- 172.
  • 4孙玉文,刘伟军,王越超,刘健.截面扫描型点云数据的几何处理技术[J].机械科学与技术,2002,21(6):1025-1027. 被引量:2
  • 5Kwan H Lee, Woo H. Direct integration of reverse engineering and rapid prototyping [ J ]. Computer & Industrial Engineering, 2000,38( 1 ) :21-38.

二级参考文献8

  • 1[1]Bopaya Bidanda,Yasser A Hosni.Reverse engineering and its relevance to industrial engineering:a critical review[J].Computers ind.Engng,1994,26(2):343~348.
  • 2[2]Tamas Varady,Ralph R Martin,Jordan Coxt.Reverse engineering of geometric models-an introduction[J].Computer-Aided Design,1997,29(4):255~268.
  • 3[3]D J Weir,M J Milroy,C Bradley,G W Vickers.Reverse engineering physical models employing wrap-around B-spline surfaces and quadrics[J].Part B:J. of Engineering Manufacture,1996,IMechE 210,147~157.
  • 4[4]Daschbach,abella,McNichols.Reverse engineering:a tool for process planning[J].Computer ind.Engng,1995,29(1-4):637~640.
  • 5Varady T,Martin R R,Cox J. Reverse engineering of geometric models-an introduction[J]. Computer Aided Design,1997,29(4):255~268
  • 6Yang M,Lee E. Segmentation of measured point data using a parametric quadric surface approximation[J]. CAD,1999,31(6):449~457
  • 7李江雄,柯映林.基于特征的复杂曲面反求建模技术研究[J].机械工程学报,2000,36(5):18-22. 被引量:55
  • 8孙玉文,王晓明,郭东明.反求工程中复杂多面体模型的网格简化算法[J].中国机械工程,2001,12(8):922-925. 被引量:5

共引文献59

同被引文献28

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部