期刊文献+

薄带连铸布流器数学物理模拟研究 被引量:2

Physical and Mathematical Simulation of the Feeding System in Strip Casting Process
下载PDF
导出
摘要 按照相似理论的原则,采用宝钢自主开发的布流器系统,建立了薄带连铸1∶1的水模型。应用中科院DJ800系统测定了在不同的水口插入深度情况下的熔池内液面波动情况;与此同时,应用连续性方程、N-S方程及湍流k-ε方程对该模型进行了流体数值计算,得出了水模型内部的流场分布,对比数值计算的结果与水模型试验结果,两者吻合较好。 A 1:1 water model for a twin-roll strip caster was set up based on the Froude and Reynolds number similarity criteria, using the feeding system developed independently by Baosteel. The fluctuation in the molten pool of the twin-roll strip casting process was measured with the DJ800 system developed by the Chinese Academy of Sciences. Meanwhile, the flow numerical calculation was conducted by using the continuous equation, N-S equation and K-e equation and the flow field distribution in the water model was obtained. Through comparing with each other, the simulation results were in agreement with the experimental results.
出处 《宝钢技术》 CAS 2009年第4期19-22,共4页 Baosteel Technology
关键词 薄带连铸 物理模拟 布流器 数值模拟 strip casting physical simulation feeding system numerical simulation
  • 相关文献

参考文献5

  • 1王波,张捷宇,张胤,贺友多,樊俊飞,方园,安胜利.双辊薄带连铸布流系统的模拟优化研究[J].铸造技术,2006,27(7):707-710. 被引量:12
  • 2文光华,祝明妹,何俊范,李刚,韩志伟,丁培道.双辊薄带连铸熔池液面波动物理模拟[J].金属学报,2000,36(9):1001-1004. 被引量:23
  • 3Cook R, Grocock P C, Thomas P M, et al. Development of the twin-roll casting process [J]. Journal of Materials Processing Technology, 1995,55 (2) :76 - 84.
  • 4Tavares R P , Guthrie R I L. Analysis of metal dehvery systems for twin-roll strip casting systems using mathematical and physical models for turbulent fluid flow, heat transfer and solidification [ C ]//Computer applications in metallurgy and materials processing. Montreal: The Metallurgical Society of CIM, 1999 : 204 - 218.
  • 5Ohler C, Odenthal H J, Pfeffer H. Laser-optical measurements and CFD simulation for a water model of a twin roll strip caster with a roll width of 150 mm [ C]// Proceedings of the 4th European Continuous Casting Conference. Birmingham: Institute of Materials, Minerals and Mining,2002 : 945 -955.

二级参考文献10

  • 1[1]Miyake S . ISIJ International, 1991; 7:689
  • 2[2]Macci F . Steel Times, 1995; 6:230
  • 3[3]Legrand H, Martel D . Steel Times, 1998; 3:104
  • 4[4]Bouchard D, Busque F, Hamel F G. Steelmaking Conf Proc, Chicago: ISS, 1999; 82:723
  • 5R Cook,P G Grocock,P M Thomas,et al.Development of the twin-roll casting process[J].Journal of Materials Processing Technology,1995,55(2):76-84.
  • 6D Bouchard,F Busque,F G Hamel.Fluid Flow Study of a Twin Roll Strip Caster Mold Using a Water Model[J].Steelmaking Conference Proceeding,Chicago:ISS,1999,(82):427-436.
  • 7D Bouchard,F G Hamel,S F Turcotte,et al.Water Modeling Evaluation of Metal Delivery in a Twin Roll Strip Caster Using Pool Level and Residence Time Distribution Measurements[J].ISIJ International,2001,41(12):1465-1472.
  • 8R P Tavares,R I L Guthrie.Computational fluid dynamics applied to twin-roll casting[J].Canadian Metallurgical Quarterly,1998,37(3-4):241-250.
  • 9P Q Netto,R P Tavares,R I L Guthrie.Mathematical Models for Near Net Shape Casting Processes[J].ISIJ International,1996,36(Supplement):175-178.
  • 10文光华,祝明妹,何俊范,李刚,韩志伟,丁培道.双辊薄带连铸熔池液面波动物理模拟[J].金属学报,2000,36(9):1001-1004. 被引量:23

共引文献28

同被引文献18

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部