摘要
四会市污水处理厂采用了厌氧反应池/高负荷生物滤池/固体接触池处理工艺,该工艺具有造价低、出水水质好、运行费用低、污泥产量少等优点。污水厂出水COD、BOD5、SS、氨氮、磷酸盐分别为32、12、10、7.6、0.48 mg/L,达到了设计要求,运行费用仅为0.48元/m3。
The combined process of anaerobic reaction tank/high load biological filter/solid contact tank is used in Sihui Municipal Sewage Treatment Plant. This combined process has advantages of low cost, high quality effluent, low operation costs and low sludge yield. The effluent COD, BOD5, SS, NH3 - N and phosphate are 32 rag/L, 12 rng/L, 10 mg/L, 7.6 mg/L and 0.48 mg/L respectively, reaching the design requirement, and the operation cost is only 0.48 yuan/m^3.
出处
《中国给水排水》
CAS
CSCD
北大核心
2009年第18期49-51,共3页
China Water & Wastewater
关键词
污水处理
厌氧反应池
高负荷生物滤池
固体接触池
sewage treatment
anaerobic reaction tank
high load biological filter
solid contact tank