动态热负荷下的供热调节

Dynamic Heat Load of Heating Under the Regulation

通过采用房间热平衡法动态负荷计算与采用稳态方法计算求得的逐时负荷的比较,得出了根据实时气温利用供热调节公式计算求得的供回水平均温度进行供热调节,虽然是安全的,但并不节能的结论。指出,采用利用室内外温差修正的方法计算供回水平均温度,才可以实现节能的目的。

Through the use of the room heat balance method dynamic load calculation method and the use ot steady-state when the load obtained by the comparison, the use of the heating temperature based on real-time adjustment formula obtained for the backwater of the average heating temperature regulation, although safe, but not energy-saving. Adopted amendments to the use of indoor and outdoor temperature difference between the calculated average temperature for the backwater, the purpose of energy saving can be achieved.