摘要
A series of copper-cobalt oxides supported on nano-titanium dioxide were prepared for the reduction of nitric oxide with carbon monoxide and characterized using techniques such as XRD, BET and TPR. Catalyst CuCoOx/TiO2 with Cu/Co molar ratio of 1/2, CuCo total loading of 30% at the calcination temperature of 350℃ formed CuCo204 spinel and had the highest activity. NO conversion reached 98.9% at 200℃. Mechanism of the reduction was also investigated, N20 was mainly yielded below 100℃, while N2 was produced instead at higher temperature. O2 was supposed to accelerate the reaction between NOx and CO for its oxidation of NO to give more easily reduced NO2, but the oxidation of CO by O2 to CO2 decreased the speed of the reaction greatly. Either SO2 or H20 had no adverse impact on the activity of NO reduction; however, in the presence of both SO2 and H20, the catalyst deactivated quickly.
A series of copper-cobalt oxides supported on nano-titanium dioxide were prepared for the reduction of nitric oxide with carbon monoxide and characterized using techniques such as XRD, BET and TPR. Catalyst CuCoOx/TiO2 with Cu/Co molar ratio of 1/2, CuCo total loading of 30% at the calcination temperature of 350℃ formed CuCo204 spinel and had the highest activity. NO conversion reached 98.9% at 200℃. Mechanism of the reduction was also investigated, N20 was mainly yielded below 100℃, while N2 was produced instead at higher temperature. O2 was supposed to accelerate the reaction between NOx and CO for its oxidation of NO to give more easily reduced NO2, but the oxidation of CO by O2 to CO2 decreased the speed of the reaction greatly. Either SO2 or H20 had no adverse impact on the activity of NO reduction; however, in the presence of both SO2 and H20, the catalyst deactivated quickly.
基金
supported by the Doctoral Fund of Ministry of Education of China(No.200805301004)
the Hunan Provincial Natural Science Foundation of China(No.07JJ4003)
the Scientific Research Fund of Hunan Provincial Education Department(No.08C890)
