期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

基于ABAQUS的车削过程有限元模拟及分析 被引量：6

The Finite Element Analysis and Simulation of Turning Based on ABAQUS
下载PDF
导出
摘要 针对斜角车削的特点,建立了其三维有限元模型,运用ABAQUS有限元软件对AISI-1045钢车削过程进行力-热耦合模拟分析,并将其仿真结果与经验及理论结果对比,验证了该模拟方法的有效性,对进一步开展车削加工精度控制研究具有一定的指导意义。 Based on the characteristics of turning with oblique angle, a three-dimensional finite element model was established to simulate the AISI-1045 steel turning process with consideration of the cutting force and temperature. Comparing the simulation result with the theoretical result, this model was proved to be valid for turning process. It has some guiding significance for further study of precision control in turning process.
作者 荣志刚 焦黎 贺晓洋 钱钰博
机构地区 北京理工大学机械与车辆工程学院 北京卫星制造厂
出处 《机床与液压》 北大核心 2009年第9期233-236,共4页 Machine Tool & Hydraulics
关键词 三维有限元模拟 车削力 车削温度 3D finite element modeling Turning force Turning temperature
分类号 TG501.3 [金属学及工艺—金属切削加工及机床] TG501.4 [金属学及工艺—金属切削加工及机床]
  • 相关文献

参考文献8

二级参考文献49

  • 1吉尔WR 范德伯奇GE.耕作和牵引土壤动力学[M].北京：中国农业机械出版社,1967..
  • 2郭志军.[D].长春:吉林大学,2002.
  • 3Ceretti E, lucchi M, Ahan T. FEM simulation of orthogonal cutting, serrated chip formation[J]. Journal of Materials Processing Technology, 1999,95 : 1 7 - 26.
  • 4Ceretti E, Lazzaroni C, Menegardo L, Altan T. Turning simulation using a three-dimension FEM code[J]. Journal of Materials Processing Technology, 2000,98 : 99- 103.
  • 5Ceretti E,Taupin E,Altan T. Simulation of metal flow and fracture application in orthogonal cutting, blanking and cold extrusion[J]. Annal of CIRP, 1997,46(1) :187-190.
  • 6Zhang L C. On the separation criteria in the simulation of orthogonal metal cutting using the finite element method[J]. Journal of Materials Processing Technology, 1999,88-89.
  • 7Huang J M, Black J T. An evaluation of chip separation Criteria for the FEM simulation of machining[J]. ASME.Journal of Manufacturing Science and Engineering, 1996,118:118-545.
  • 8Lin Zone-Ching,Lai Wun-Ling, Lin H Y, Liu C R. The study of ultra-precision machining and residual stress for NiP alloy with different cutting speeds and depth of cut[J]. Journal of Materials Processing Technology, 2000,97:200-210.
  • 9Movahhedy M,Gadala M S, Altintas Y. Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian-Eulerian finite-element method [J]. Journal of Material Processing Technology, 2000,103 : 267 - 275.
  • 10Piispanen V. Theory of formation of metal chips[J]. Journal of Applied Physics, 1948,19 : 876.

共引文献98

同被引文献59

  • 1盛莉莉.车削温度场的可视化研究[J].上海第二工业大学学报,2005,22(5):45-49. 被引量：3
  • 2罗蓬,胡侨丹,夏巨谌,胡国安.车削过程的三维有限元数值模拟[J].华中科技大学学报（自然科学版）,2006,34(4):89-92. 被引量：6
  • 3汪文津,王太勇,范胜波,罗珺,李娜.车削过程切削力的计算机数值仿真[J].机械强度,2006,28(5):725-728. 被引量：11
  • 4陈日耀.金属切削原理[M].北京:机械工业出版社,2002.
  • 5Davies M A,Cao Q,Cooks A L. On the measurement andprediction of temperature fields in machining AISI 1045Steel[C]. CIRP Ann Manuf Technol,2003, 52(1):77 -80.
  • 6Fang Gang, Zeng Pan. Three dimensional thermo - elastic-plastic couple FEM simulations for metal oblique cuttingprocesses [ J]. Journal of Material Processing Technology,2005,168(1) :42 -48.
  • 7如何根据切屑颜色来粗略判断切削温度[OL].数控中国论坛,http://bbs. shukongcn. com/forum, php. mod =viewthread&tid = 48691 &archiver = l&page = 2.
  • 8Lei S T,Devarajan S,Chang Z H. A study of micropool lubri-cated cutting tool in machining of mild steel[ J] . Journal ofMaterials Processing Technology, 2009,209 ( 3 ) : 1612 -1620.
  • 9Deng J X,Wu Z,Lian Y S,et al. Performance of carbidetools with textured rake-face filled with solid lubricants indry cutting processes [ J]. Int. Journal of Refractory Metalsand Hard Materials,2012(30) :164 - 172.
  • 10Enomoto T,Sugihara T. Improving anti-adhesive properties ofcutting tool surfaces by nano-/micro-textures[ J] . CIRP An-nals-Manufacturing Technology ,2010(59) :597 -600.

引证文献6

二级引证文献29

机床与液压
2009年 第9期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部