期刊文献+

Preparation of porous chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles via mineralization

Preparation of porous chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles via mineralization
原文传递
导出
摘要 In this work, the preparation of chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles (CS-PAA-CaP NP) based on the mineralization of calcium phosphate (CaP) on the surface of chito-san-poly (acrylic acid) nanoparticles (CS-PAA NPs) was reported. CS-PAA-CaP NPs were achieved by directly adding ammonia to the aqueous solution of CS-PAA nanoparticles or by thermal decomposi-tion of urea in the aqueous solution of CS-PAA nanoparticles, resulting in the mineralization of CaP on the surface of CS-PAA NPs. Through these two routes, especially using urea as a pH-regulator, the precipitation of CS-PAA NPs, a common occurrence in basic environment, was avoided. The size, morphology and ingredient of CS-PAA-CaP hybrid nanoparticles were characterized by dynamic light scattering (DLS), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetry analysis (TGA) and X-ray diffractometer (XRD). When urea was used as the pH regulator to facilitate the mineralization during the thermal urea decomposition procedure, regular CS-PAA-CaP hybrid nanoparticles with a porosity-structural CaP shells and 400―600 nm size were obtained. TGA result revealed that the hybrid NPs contained approximately 23% inorganic component, which was consistent with the ratio of starting materials. The XRD spectra of hybrid nanoparticles in-dicated that dicalcium phosphate (DCP: CaHPO4) crystal was a dominant component of mineralization. The porous structure of the CS-PAA-CaP hybrid NPs might be greatly useful in pharmaceutical and other medical applications. In this work, the preparation of chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles (CS-PAA-CaP NP) based on the mineralization of calcium phosphate (CAP) on the surface of chitosan-poly (acrylic acid) nanoparticles (CS-PAA NPs) was reported. CS-PAA-CaP NPs were achieved by directly adding ammonia to the aqueous solution of CS-PAA nanoparticles or by thermal decomposition of urea in the aqueous solution of CS-PAA nanoparticles, resulting in the mineralization of CaP on the surface of CS-PAA NPs. Through these two routes, especially using urea as a pH-regulator, the precipitation of CS-PAA NPs, a common occurrence in basic environment, was avoided. The size, morphology and ingredient of CS-PAA-CaP hybrid nanoparticles were characterized by dynamic light scattering (DLS), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetry analysis (TGA) and X-ray diffractometer (XRD). When urea was used as the pH regulator to facilitate the mineralization during the thermal urea decomposition procedure, regular CS-PAA-CaP hybrid nanoparticles with a porosity-structural CaP shells and 400-600 nm size were obtained. TGA result revealed that the hybrid NPs contained approximately 23% inorganic component, which was consistent with the ratio of starting materials. The XRD spectra of hybrid nanoparticles in- dicated that dicalcium phosphate (DCP: CaHPO4) crystal was a dominant component of mineralization. The porous structure of the CS-PAA-CaP hybrid NPs might be greatly useful in pharmaceutical and other medical applications.
出处 《Chinese Science Bulletin》 SCIE EI CAS 2009年第18期3127-3136,共10页
基金 Supported by the National Natural Science Foundation of China (Grant Nos. 50603008, 50625311) National High-Tech Research & Development Program of China (Grant No. 2007AA100704) Cultivation Fund of Key Scientific and Technical Innovation Project,Ministry of Education of China (Grant No. 707028)
关键词 纳米粒子 丙烯酸 壳聚糖 磷酸钙 多孔 制备 混合 矿化 biomineralization, calcium phosphate, hybrid nanoparticles
  • 相关文献

参考文献12

  • 1Annie John,S. Abiraman,H. K. Varma,T. V. Kumari,P. R. Umashankar.Bone growth response with porous hydroxyapatite granules in a critical sized lapine tibial-defect model[J].Bulletin of Materials Science.2002(2)
  • 2Yoshiyuki Yokogawa,Kaori Nishizawa,Fukue Nagata,Tetsuya Kameyama.Bioactive Properties of Chitin/Chitosan—Calcium Phosphate Composite Materials[J].Journal of Sol - Gel Science and Technology (-).2001(1-2)
  • 3Sokolsky-Papkov M,,Domb A J.Polymer carriers for drug delivery in tissue engineering[].Advanced Drug Delivery Reviews.2007
  • 4Ueda H,Tabata Y.Polyhydroxyalkanonate derivatives in current clinical applications and trials[].Advanced Drug Delivery Reviews.2003
  • 5Sugawara A,Yamane S.Nanogel-templated mineralization: Poly- mer-calcium phosphate hybrid nanomaterials[].Macromolecular Rapid Communications.2006
  • 6Qurashi M T,Blair H S,Allen S J.Studies on modified chitosan membranes. 1. Preparation and Characterization[].Journal of Applied Polymer Science.1992
  • 7Murugan R,Ramakrishna S.Bioresorbable composite bone paste using polysaccharide based nano hydroxyapatite[].Biomaterials.2004
  • 8Hu Y,Jiang X,Ding Y,et al.Synthesis and characterization of chitosan-poly(acrylic acid) nanoparticles[].Biomaterials.2002
  • 9Mao HQ,Roy K,Troung-Le VL,et al.Chitosan-DNA nanoparticles as gene carriers: synthesis, characterization and transfection efficiency[].Journal of Controlled Release.2001
  • 10Sang Tong Nam,Young Moo Lee.Pervaporation and properties of chitosan-poly (acrylic acid) complex membranes[].Journal of Membrane Science.1997

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部