期刊文献+

成核剂对聚氨酯泡沫成核性能的影响 被引量:3

Effects of Nucleation Agent on Nucleation Performance of Polyurethane Foam
下载PDF
导出
摘要 主要研究了聚氨酯发泡过程中成核剂的添加量、颗粒大小及颗粒的表面状态对气泡成核过程的影响。结果表明:成核剂的加入可有效地促进气泡成核,降低泡孔尺寸;大尺寸颗粒的成核效果要好于小尺寸颗粒;成核剂的颗粒状态对气泡成核的影响不明显。 Effects of addition quantity, particle size and surface state of nucleation agent on the bubble nucleation course during foaming of polyurethane were mainly studied. The results show that adding nucleation agent can effectively improve bubble nucleation and reduce cell size; nucleating effect of larger particles is better than that of the small ones; but the particle state of nucleation agent has little influence on bubble nucleation.
出处 《化学推进剂与高分子材料》 CAS 2009年第5期41-43,共3页 Chemical Propellants & Polymeric Materials
关键词 聚氨酯泡沫 成核剂 成核 polyurethane foam nucleation agent nucleation
  • 相关文献

参考文献6

  • 1Blander M, Katz J L. Bubble nucleation in liquids[J]. AICh E Journal, 1975, 21(5): 833-848.
  • 2RamonJAlbalak著.聚合物脱挥[M].赵旭涛,龚光碧,谷育生,等译.北京:化学工业出版社.2005.49-62.
  • 3Colton J S, Suh N P. The nucleation of microcellular thermoplastic foam with additives: Part I: Theoretical considerations[J]. Polymer Engineering and Science, 1987, 27(7): 485-492.
  • 4Colton J S, Suh N P. Nucleation of microceilular foam: Theory and practice[J]. Polymer Engineering and Science, 1987, 27(7): 500-503.
  • 5Chen L, Blizard K, Straff R et al. Effect of filler size on cell nucleation during foaming process[J]. Journal of Cellular Plastics, 2002, 38(2): 139-148.
  • 6蔡业彬,国明成,彭玉成,谢存禧.泡沫塑料加工过程中的气泡成核理论(Ⅰ)——经典成核理论及述评[J].塑料科技,2005,33(3):11-16. 被引量:32

二级参考文献15

  • 1J.E. Martini, F.A. Waldman, N.P. Suh, Production and analysis of microcellular thermoplastics foams[J]. Annual Technical Conference-Society of Plastics Engineers, San Francisco, CA, USA, Soc of Plastics Engineers, 1982:674~676.
  • 2M. Blander, J.L. Katz. Bubble nucleation in liquids [J]. AIChE Journal, 1975,21(5) :833~848.
  • 3J.R. Youn, N.P. Suh, Processing of microcellular polyester composites, Polymer Composites[J]. 1985,6(3): 175~180.
  • 4J.S. Colton, N.P.Suh, The nucleation of microcellular thermoplastic foam with additives: Part Ⅰ: Theoretical considerations [J].Polymer Engineering and Science, 1987,27 (7): 485~492.
  • 5S.Wu., Interfacial and surface tensions of polymers [J]. J. Marcromol. Sci.-Revs. Macromol. Chem., 1974,10( 1 ): 35~45.
  • 6D.Y.Kwok, L.K. Cheung, C.B.Park, A.W.Neumann. Study on the surface tensions of polymer melts using axisymmetric drop shape analysis[J]. Polymer Engineering and Science, 1998,38 (5): 757~ 764.
  • 7Sumarno, T.Sunada, Y.Sato, S.Takishima, H.Masuoka, Polystyrene microcellular plastic generation by quick-heating process at high temperature[J]. Polymer Engineering and Science, 2000,40(7): 1510~1521.
  • 8S.K. Goel, E.J. Beckman. Generation of microcellular polymeric foams using supercritical carbon dioxide. Ⅰ: Effect of pressure and temperature on nucleation[J]. Polymer Engineering and Science,1994,34(14): 1137~1147.
  • 9J.S. Colton, N.P. Suh. The nucleation of microcellular thermoplatic foam with additives: Part Ⅰ: Experimental results and discussion [J]. Polymer Engineering and Science, 1987,27 (7): 493~499.
  • 10J.S. Colton, N.P.Suh, Nucleation of microcellular foam: Theory and practice [J]. Polymer Engineering and Science, 1987, 27(7) :500~503.

共引文献31

同被引文献60

  • 1王新轲,陈亚洪,王贵友.阻燃多元醇的合成及在聚氨酯泡沫中的应用[J].高分子材料科学与工程,2015,31(6):27-33. 被引量:15
  • 2袁开军,江治,李疏芬,周允基.聚氨酯的热分解研究进展[J].高分子材料科学与工程,2005,21(4):51-54. 被引量:32
  • 3Youn J R, Suh N P. Processing of Microcellular Polyester Composites[J]. Polymer Composites, 1985, 6 (3): 175-180.
  • 4Kim Y, Park C B, Chen P, et al. Maximal Cell Density Predictions for Compressible Polymer Foams [J]. Poly- mer, 2013,54(2) : 841-845.
  • 5Verdejo R, Stampfli R, Alvarez L M, et al. Enhanced A- coustic Damping in Flexible Polyurethane Foams Filled with Carbon Nanotubes[J]. Composites Science and Tech- nology, 2009,69(10) : 1564-1569.
  • 6Ling J Q, Zhai W T, Feng W W, et al. Facile Preparation of Lightweight Microcellular Polyetherimide/Graphene Composite Foams for Electromagnetic Interference Shiel- ding[J]. ACS Appl Mater Interfaces, 2013, 5 (7): 2677-2684.
  • 7Jacobs L J M, Kemmere M F, Keurentjes J T F. Sustai- nable Polymer Foaming Using High Pressure Carbon Di- oxide: a Review on Fundamentals, Processes and Applica- tions[J]. Green Chemistry, 2008,10(7) : 731-738.
  • 8Yang J T, Huang I. Q, Zhang Y F, et al. Mesoporous Silica Particles Grafted with Polystyrene Brushes as a Nu- cleation Agent for Polystyrene Supercritical Carbon Dio- xide Foaming[J]. Journal of Applied Polymer Science, 2013,130(6) : 4308-4317.
  • 9Colton J S, Suh N P. The Nucleation of Microcellular Thermoplastic Foam With Additives Part I Theoretical Considerations[J]. Polymer Engineering and Science, 1987,27(7) :485-492.
  • 10Colton J S, Suh N P. The Nucleation of Microcellular Thermoplastic Foam with Additives- Part II- Experimental Results and Discussion[J]. Polymer Engineering and Sci- ence, 1987,27(7) :493-499.

引证文献3

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部