期刊文献+

一字内芯全钢防屈曲支撑的有限元分析 被引量:7

下载PDF
导出
摘要 一字内芯全钢防屈曲支撑具有构造简单和重量轻等特点。本文通过对一字内芯全钢约束防屈曲支撑进行有限元分析,给出了支撑内芯宽厚比的取值范围和不同初弯曲下支撑约束比的取值范围,以供支撑设计人员参考。
作者 吴勇
出处 《低温建筑技术》 2009年第9期78-80,共3页 Low Temperature Architecture Technology
  • 相关文献

参考文献3

二级参考文献62

  • 1汪家铭,中岛正爱,陆烨.屈曲约束支撑体系的应用与研究进展(Ⅰ)[J].建筑钢结构进展,2005,7(1):1-12. 被引量:189
  • 2蔡克铨,黄彦智,翁崇兴.双管式挫屈束制(屈曲约束)支撑之耐震行为与应用[J].建筑钢结构进展,2005,7(3):1-8. 被引量:102
  • 3刘季,周云.结构抗震控制的研究与应用状况(上)──基础隔震与耗能减震技术[J].哈尔滨建筑大学学报,1995,28(4):1-10. 被引量:41
  • 4郭彦林,刘建彬,蔡益燕,邓科.结构的耗能减震与防屈曲支撑[J].建筑结构,2005,35(8):18-23. 被引量:102
  • 5徐芝纶.弹性力学简明教程[M].北京:人民教育出版社,1981.92-100.
  • 6[19]Brown, A. P. ,Aiken, I. D. and Jafarazadeh, F. J. (2001).Buckling restrained braces provide the key to the seismic retro fit of the Wallace F. Bennett Federal Building. Modern Steel Construction, August, 29- 37.
  • 7[20]Wada, A. , Connor, J. , Kawai, H. , Iwata, M. , and Watanabe,A. (1992). Damage tolerant structures. Proceedings, 5th U.S. -Japan Workshop on the Improvement of Structural Design and Construction Practices, ATC 15 - 4, Applied Technology Council, San Diego, CA, 27-39.
  • 8[22]Wakabayashi, M. , Nakamura, T. , Kashibara, A. , Morizono,T. And Yokoyama, H. (1973). Experimental study of elastoplastic properties of precast concrete wall panels with built-in insulating braces, Summaries of Technical Papers of Annual Meeting,Architectural Institute of Japan, 1041 - 1044. (in Japanese)
  • 9[23]Inoue,K. and Sawaisumi S. (1992). Bracing design criterion of the reinforced concrete panel including unbonded steel diagonal braces,Journal of Structural and Construction Engineering,Architectural Institute of Japan, 432, 41 49. ( in Japanese)
  • 10[24]Fujimoto, M. , Wada, A. , Saeki, E. , Watanabe, A. , and Hito mi,Y. (1988). A study on the unbonded brace encased in buckling-restraining concrete and steel tube. Journal of Structural Engineering,Architectural Institute of Japan, No. 034B,249-258. (in Japanese)

共引文献292

同被引文献58

引证文献7

二级引证文献36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部