大电源接入系统方式的比较

Comparative Research on Grid-Connection Modes for Huge Power Supplies

未来在我国的西南和西北地区将出现一些大型甚至巨型电站,这些大型电源以何种方式接入系统,以及接入系统应遵循的相关原则,则是必须研究解决的问题。首先从机制上对几种大电源接入交流系统方式的暂态稳定性进行了详细的分析和比较;然后对大型算例系统进行了详尽的暂态稳定仿真;最终得出了一些有用的结论:一般情况下,打捆送电方式有利于提高送出系统的稳定性;如果有助于显著增加领前群的惯量,则与送端系统相联的方式也有助于提高送电系统的稳定性,但仍要结合具体系统进行分析。

Hereafter some large-scale power plants even huge hydropower stations will be built up in Northwest and Southwest China. What kind of grid-connection modes to be applied to these large-scale or huge power suppliers and the relevant grid-connection principles to be followed by these power suppliers are the problems to be researched and solved. Firstly, the transient stability of the modes by which some kinds of huge power suppliers are connected with AC power grid is analyzed and compared in detail; then a detailed transient stability simulation of a certain large-scale demonstration system is performed; finally some helpful conclusions are obtained： in the general situation, the bundling power transmission mode is favorable to increase the stability of sending system; if it is helpful to evidently increase the inertia of the equivalent leading group, the mode that connects the huge power supplier with sending system will be helpful to enhance the stability of sending system, however it is necessary to perform simulation and analysis while these principles are applied to FACT systems.