期刊文献+

潜水电泵电缆引入密封装置的分析与改进设计

Analysis and Improved Design of the Cable Entry Sealed Equipment of Submersible Pump
下载PDF
导出
摘要 根据实际工作经验,在系统地分析潜水电泵电缆引入密封装置使用寿命短的影响因素基础上,对其作了结构改进。主要采取了在传统密封装置结构上依次增加涨圈、压紧垫圈、次级压紧螺栓、O形橡胶密封圈、紧固件和次级接线盒等措施,共同组成二道面与面接触的密封系统。改进后的潜水电泵不仅在潜水深度上大大超过标称深度达5m以上,而且延长了使用寿命。 According to practical experience, the paper systematically analyses some factors affecting the life of the cable entry sealed device, and then makes some construal improvements. In order to compose a containment system with two interfaces, it adopts measures such as adding piston rings, packing washers, subordinate hold-down bolts, "O" pattern rubber packing rings, fastener and subordinate terminal boxes. The improved submersible pump not only easily outnumbered the nominal depth by 5 m, but also extended the service life.
出处 《农业装备与车辆工程》 2009年第9期22-24,33,共4页 Agricultural Equipment & Vehicle Engineering
关键词 潜水电泵 橡胶 密封 改进设计 submersible-pump rubber sealed improved design
  • 相关文献

参考文献1

二级参考文献3

  • 1唐友亮.潜水泵故障诊断系统[D].镇江:江苏大学,2004:25-60.
  • 2李世煌,袁秀文.潜水电泵的使用及维修[M].北京:机械工业出版社,1995.
  • 3周雨农.潜水轴流泵的应用实践[J].水利科技,2001(2):51-53. 被引量:10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部