摘要
采用Fenton法对医药废水进行预处理。当原水COD约为11000mg/L时,COD去除率可达90%以上,并得到最佳操作条件为:H2O2投加量为60g/L,Fe^2+投加量为1.0g/L,反应时间为30min,pH=4.0—6.0。对比反应前后的紫外光谱说明,经Fenton反应后原水中的芳香化合物已得到了彻底的氧化分解。
Fenton process is used as a pretreatment method to treat pharmaceutical wastewater. The results show that the removal of COD could arrive at above 90% with the best operation condition of 1.0 g/L of C ( Fe^2+ ) and 30rain Of time and 60mg/L of C ( H2O2 ) and 4. 0 to 6. 0 of pH. The ultraviolet spectrum indicates that after Fenton process the aromatic compounds are oxidized completely.
出处
《环境科学导刊》
2009年第5期49-51,共3页
Environmental Science Survey
关键词
医药废水
FENTON
氧化
预处理
pharmaceutical wastewater
Fenton
Oxidation
pretreatment