摘要
挤出物膨胀是由于橡胶的粘弹特性使其在流动过程中形成的应力的松弛和胶料流动速度在口型挤出后重新分布的综合作用产生的。挤出口型设计经验为一些有学识的人所掌握,这项工作被看作一门不可见的技艺。
同被引文献10
-
1黄兴元,柳和生,周国发,罗忠民,李绅元.气辅挤出过程中挤出胀大的实验和模拟研究[J].塑料,2005,34(6):55-59. 被引量:12
-
2Huang D C, White J L. Extrudate swell from slit and capillary dies:an experimental and theoretical study [J]. Polym. Eng. Sci. , 1979,19: 609-616.
-
3Huang D C, White J L. Experimental and theoretical investigation ofextrudate swell of polymer melts from small( length) /(cross-section)ratio slit and capillary dies [ j]. Polym, Eng. Sci, , 1980,20: 182-189.
-
4Mullner H W, Wieczorek A.Petracek P I, et al. Experimentalvalidation of a viscoelastic material mode for numerical simulation ofthe extrusion process of mbber blends [J].]. PAMM, 2007 , 7;41100027-41100028.
-
5Karagiannis A, Hrymak A Vlachopoulos J. Three-dimensionalnon-isothermal extrusion flows [J]. Rheol. Acta, 1989, 28: 121-133.
-
6Mamalis A G, Vortselas A K, Kouzilos G. Tube extrusion ofpolymeric materials: optimization of the processing parameters [J].J. Appl. Polym. Sci.,2012, 126: 186-193.
-
7Dai Y K, Zhou C X, Yu W, Inverse designing simulation ofextrusion die of auto rubber seal and verifications [ J ]. Plast.Rubber Compos. , 2007, 36: 141-148.
-
8戴元坎,李向阳,周持兴.橡胶密封条挤出流道的计算机模拟优化设计[J].合成橡胶工业,2008,31(2):92-95. 被引量:5
-
9甘学辉,马晓建,刘强,曹均雨,刘娜娜,杨崇倡.基于Polyflow十字形纤维挤出成形过程的模拟计算[J].纺织学报,2011,32(7):132-136. 被引量:9
-
10涂志刚,柳和生,包忠诩.粘弹性聚合物熔体挤出胀大的三维计算机模拟[J].塑料科技,2003,31(1):15-19. 被引量:6
-
1雷选民.橡胶挤出膨胀纵横谈[J].特种橡胶制品,1992,13(4):36-40.
-
2雷选民.几种橡胶型材挤出口型设计[J].特种橡胶制品,1991(3):44-47.
-
3梁基照.内胎胶挤出流动中第一法向应力差的预测[J].合成橡胶工业,2000,23(5):303-305. 被引量:1
-
4权艳,王爱萍,张红霞.全钢子午线轮胎部件挤出口型设计[J].橡胶科技,2008,10(11):13-15. 被引量:3
-
5梁基照.用于评估聚合物熔体流变特性的挤出口型设计[J].机械开发,1994(1):16-23.
-
6雷选民,殷国华.微波连续硫化橡胶制品的挤出口型设计[J].橡胶工业,1995,42(3):160-165. 被引量:3
-
7梁基照.内胎胶挤出流动中出口压力降的估算[J].合成材料老化与应用,1999,28(4):18-20.
-
8雷选民,殷国华.三复合密封条挤出口型设计[J].特种橡胶制品,1993,14(6):36-39.
-
9谢立.胶料挤出口型膨胀预测[J].橡胶工业,1999,46(11):680-682.
-
10黄梦(编译).毛细管流变仪[J].橡塑机械时代,2007,19(2):38-38. 被引量:1