摘要
采用正交优化法研究了沉淀聚合制备高三尖杉酯碱印迹聚合物的优化合成条件。固定模板分子用量,从3个水平考察了4个因子,即溶剂(乙腈)用量(A)、反应温度(B)、功能单体(甲基丙烯酸,MAA)用量(C)和交联剂(乙二醇二甲基丙烯酸酯,EGDMA)用量(D),对印迹聚合物合成条件进行优化,并研究了因子之间的相互作用对印迹聚合物吸附性能的影响。结果表明:在所考察的4个因子中,功能单体用量对印迹聚合物的吸附量影响最甚,其次是交联剂用量、溶剂用量及合成温度。单从吸附量而言,最优的合成条件是:功能单体(MAA)用量0.12mmol,交联剂(EGDMA)用量0.4mmol,溶剂(乙腈)用量2.5mL,温度65℃。因子间相互作用对分子印迹聚合物吸附量的影响结果与正交实验测试结果相符。
The precipitation polymerization method was optimized by using a L9(34) orthogonal factorial design for the preparation of homoharringtonine imprinted polymer (HIP). Optimization of the synthesis condition for the HIP was performed by investigating the influence of four factors, i.e. solvent (acetonitrile) dosage (A), reaction temperature (B), functional monomer (methacrylic acid, MAA) dosage (C) and crosslinker (ethylene glycol dimethyl acrylate, EGDMA) dosage (D), and the interaction of such factors on the adsorption capacity of HIP obtained under different conditions to the template molecule. The results indicated that the influence of these factors on the adsorption capacity of the HIP decreased in the order of C, D, A and B and the optimized synthesis condition was as follows: 0.12 mmol MAA, 0.4 mmol EGDMA, 2.5 mL acetonitrile, reaction temperature at 65℃ under the fixed template dosage (0.01 retool). Also, the interaction of such factors could influence the adsorption capacity of HIP to the template.
出处
《化工进展》
EI
CAS
CSCD
北大核心
2009年第10期1787-1791,共5页
Chemical Industry and Engineering Progress
基金
湖南省教育厅青年项目资助课题(06B0706)
关键词
正交优化法
沉淀聚合
高三尖杉酯碱
分子印迹聚合物
orthogonal optimization method
precipitation polymerization
homoharringtonine
molecularly imprinted polymers