期刊文献+

电感耦合等离子体原子发射光谱法测定镀铝锌彩涂板镀层中铝、锌、硅和铁 被引量:2

ICP-AES Determination of Aluminum,Zinc,Silicon and Iron in Plating Layer of Colored Al-Zn-Galvanized Steel Sheet
下载PDF
导出
摘要 用三乙醇胺褪除彩涂镀铝锌板表面的彩涂层,用乌洛托品盐酸溶液(含铝的质量分数为5%)或氢氧化钠溶液及过氧化氢溶液(含铝的质量分数为55%)溶解镀铝锌板表面的合金镀层,用电感耦合等离子体原子发射光谱仪同时测定溶液中铝、锌、硅和铁的含量,测定值的相对标准偏差(n=10)均小于3%。 The colored-film of the steel sheet sample with definite size was removed by soaking in hot tri-(2- hydroxyethyl) amine, and the mass of the sample was weighed after washing with butanone and absolute alcohol in succession, and drying. The plating layer was then dissolved from the steel sheet with urotropin-HCl solution (for platings containing 5% of aluminum) or with NaOH solution and H2O2 solution (for platings containing 55% of aluminum). Aluminum, zinc, silicon and iron in the solution were finally determined by ICP-AES. Values of RSD's (n=10) found for the results of the 4 elements were less than 3%.
出处 《理化检验(化学分册)》 CAS CSCD 北大核心 2009年第10期1160-1162,共3页 Physical Testing and Chemical Analysis(Part B:Chemical Analysis)
关键词 电感耦合等离子体原子发射光谱法 彩涂板 合金镀层 ICP-AES Colored galvanized steel sheets Aluminum Zinc Silicon Iron Alloy plating layer
  • 相关文献

参考文献3

二级参考文献16

  • 1[2]ASTM A 792/A 792M-01.Standard Specification for Steel Sheet,55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process.
  • 2[3]ASTM A 875/A 875M-01a. Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process.
  • 3[6]ASTM A 90/A 90M-01.Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coating.
  • 4Gaillard F, Bonnard A. Durability of Adhesive Joints under Impact Conditions [J]. Le Vide Les Couches Minces, 1990,251 : 78.
  • 5China Standardization Technology Committee of Metallic and Non-metallic Coatings(全国金属与非金属覆盖层标准化技术委员会). Application Mannual of Coatings Standard (Part I )(覆盖层标准应用手册(上册)). Beijing(北京):Standa
  • 6ASTM International Standards, Number: A875/A875M-02a, 2002
  • 7ASTM International Standards, Number: A792/A792M-02, 2002
  • 8Australia Standards, Number: AS 1397-2001, 2001
  • 9JIS Standards, Number: JIS G3322-1998, 1998
  • 10JIS Standards, Number: JIS G3317-1990, 1990

共引文献29

同被引文献764

引证文献2

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部