期刊文献+

选择性加氢脱硫催化剂RSDS-1的应用 被引量:2

Application of RSDS-1 catalyst for selective hydrodesulfurization
下载PDF
导出
摘要 为进一步考察催化剂RSDS-1的选择性加氢脱硫性能,中国石油化工股份有限公司长岭分公司对RSDS装置进行了催化裂化全馏分汽油加氢试验。结果表明,在反应器上床层平均入口温度260.1℃、床层平均温度270.8℃、空速4.25 h^(-1)、氢油体积比422:1、反应压力1.40MPa的条件下,产品硫质量分数为69μg/g,研究法辛烷值损失0.7~2.0,质量满足欧Ⅲ标准的规定。 The full-range FCC naphtha selective hydrodesulfurization experiment has been successfully carried out by using RSDS-1 catalyst in the RSDS unit in SINOPEC Changling Company to further study the selective hydrodesulfurization performance of the catalyst. At the operating conditions of 260.1 ℃ average reactor inlet temperature, 270.8 ℃ average reactor bed temperature, 1.40 MPa reaction pressure, 4.25 h^-1 volumetric hourly space velocity and 422 : 1 hydrogen to oil volumetric ratio, the sulfur in the FCC naphtha after hydrogenation is reduced to 69 ppm, and the motor octane number (RON) loss is 0.7 - 2.0 unit, and the gasoline quality meet the Euro Ⅲ standards specifications.
出处 《炼油技术与工程》 CAS 2009年第10期50-52,共3页 Petroleum Refinery Engineering
关键词 催化裂化全馏分汽油 选择性加氢脱硫 RSDS 马达法辛烷值 FCC naphtha, selective hydrodesulfurization, RSDS, motor octane number
  • 相关文献

参考文献3

二级参考文献8

  • 1赵乐平,刘继华,段为宇,刘晓欣,刘家海,李彬.OCT-M催化汽油选择性加氢脱硫技术工业应用[J].当代化工,2006,35(2):109-113. 被引量:12
  • 2Badra C, Perez J A. Sulfur and Octane Trade off in FCC Naphtha Conventional Hydrotreating, Erdol Erdgas Kohle, 1997,113(6) :264.
  • 3Coates R, Myers E C. Desulfurization of Cat Cracked Naphthas with Minimal Octane Loss, NPRA AM-78-52.
  • 4Sarli M S, Fletcher D L, Hilbert T L. OCTGAINTM, A New Unique Gasoline Desulfurization Process, NPRA AM-94-39.
  • 5Shin S S, Owens P J, Palit S. Mobil's OCTGAIN^TM Process:FCC Gasoline Desulfurization Reaches a New Performance Level, NPRA AM-99-30.
  • 6Martindale D C, Antos G L, Baron K. Sulfur, Nitrogen, and Aromatics Removal from Fuels: a Comparison of Processing Options, NPRA AM-97-25.
  • 7胡永康,赵乐平,李扬,方向晨,关明华,郭洪臣.全馏分催化裂化汽油芳构化烷基化降烯烃技术的开发[J].炼油技术与工程,2004,34(1):1-4. 被引量:38
  • 8赵乐平,周勇,段为宇,梁永超,徐志达,李立权,薛浩.OCT-M催化裂化汽油选择性加氢脱硫技术[J].炼油技术与工程,2004,34(2):6-8. 被引量:72

共引文献94

同被引文献50

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部