摘要
针对某型号夹片式七孔锚具进行强度分析研究,在钢绞线一端施加大小不同的一组载荷,运用有限元仿真软件进行计算,获得该锚具的两个临界载荷值,即1200MPa和1850MPa,然后分别具体研究在这两个载荷作用下,锚具的应力、应变状态及锚圈的轴向位移变化情况。
Aiming at seven-hole anchorage of certain type, strength analysis are carried out. A series of loads with different value are done to the strands. By finite element software, the numerical simulation calculations are completed and then two critical loads are acquired, ie, 1200MPa and 1850MPa. Next under the two loads respectively, the state of stress and strain of the anehorage as well as axial displaeement of anchorage head are studied in detail.
出处
《现代制造工程》
CSCD
北大核心
2009年第10期79-82,共4页
Modern Manufacturing Engineering
基金
安微省高等学校青年教师科研基金资助项目(2008jq1084)
关键词
夹片式锚具
有限元
强度分析
anehorage
finite element method
strength analysis
