期刊文献+

优质多抗甘蓝型油菜杂交种杂双4号的选育 被引量:2

A Redesign Method Based on Parameter-sensitivity Analysis for Plate Fin-and-tube Radiators
下载PDF
导出
摘要 杂双4号是河南省农业科学院经济作物研究所选育的甘蓝型油菜细胞质雄性不育三系杂交种,其杂交组合是88A×P280。在2004年、2005年河南省油菜区域试验中,杂双4号平均产量3012.2 kg/hm^2,比对照杂98009增产8.81%。在河南省油菜生产试验中,杂双4号产量2392.5 kg/hm^2,比对照杂98009增产5.0%。杂双4号品质优良,经农业部油料及制品质量监督检验测试中心(武汉)检测,其芥酸含量1.60%,硫苷含量25.78μmol/g,含油量41.01%。该品种农艺性状优良、抗寒、抗倒伏,较耐菌核病、抗病毒病。 To set up a solid mapping relation between the internaJ structure of a radiator and its heat dissipation performance to enhance the system's performance in some bad working conditions, such as in an over-loaded or high- temperature environment, a redesign method based on parameter-sensitivity analysis is introduced here. According to the theoretical descriptions on the heat-transfer process given by forced-convection heat transfer theory, a mathematic model is built to weigh the significance of the radiator' s design parameters to the system' s heat dissipation performance. A sensitivity factor is derived by examining the effect of the variation in each parameter to the output of the system which quantitatively describing the range of the parameter' s influence to the system's performance. The new design method is expected to be a reference for radiator design under certain circumstance.
出处 《同济大学学报(自然科学版)》 EI CAS CSCD 北大核心 2009年第10期1398-1402,共5页 Journal of Tongji University:Natural Science
基金 国家科技支撑计划资助项目(2007BAF10B00,2007BAF18B02)
关键词 甘蓝型油菜 杂交种 杂双4号 选育 栽培技术 plate fin-and-tube radiator fix quantify redesign sensitivity
  • 相关文献

参考文献6

  • 1Fethi Halici, Imdat Taymaz, Mehmet Gunduz. The effect of the number of tube rows on heat, mass and momentum transfer in flat-plate finned tube heat exchangers [J]. Energy, 2001, 26 (11) :963.
  • 2Chang Y J, Wang C C. A generalized heat transfer correlation for louver fin geometry[J]. International Journal of Heat and Mass Transfer, 1997,40 ( 3 ) :533.
  • 3YANWeimon, SHEEN Payjen. Heat transfer and friction characteristics of fin-and-tube heat exchangers[J]. International Journal of Heat and Mass Transfer,2000,43:1651.
  • 4李岳林,张志沛,郭晓汾.管片式散热器在汽车发动机冷却系匹配设计中的数值模拟[J].汽车工程,2001,23(1):64-66. 被引量:7
  • 5吴利平,林贵平.车用管带式散热器的性能研究[J].车用发动机,2005(2):62-66. 被引量:9
  • 6WANG Chichuan, CHANG Yujuei. Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins[J]. International Journal of Refrigeration, 1996, 19 (4): 223.

二级参考文献7

共引文献13

同被引文献12

  • 1张国兵.仓储货架框架立柱轴心受压的稳定性分析与优化[J].物流技术,2005,24(6):34-36. 被引量:1
  • 2IKEO Shigeru,HANYA Masao. Flow force acting on two-way- cartridge valve[J].Bulletin of JSME, 1986,25 (255):2938.
  • 3LIU Song, YAO Bin. Automated onboard modeling of cartridge valve flow mapping [J].IEEE-ASME Transactions on Mechatronics, 2006,11:381.
  • 4Ouyang Xiaoping, Tilley Derek, Keogh Patrick, et al. Piezoelectric actuators for screw-in cartridge valves [ C ] //Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Xi' an: Xi' an JiaotongUniversity Press, 2008 : 49 - 55.
  • 5LI Qipeng, SHAO Senyin. Stability modeling and simulation of hydraulic cartridge sequence control [C]//2009 InternationalConference on Information Engineering and Computer Science, ICIECS 2009, Wuhan: Huazhong University of Science andTechnology Press, 2009: 1 - 4.
  • 6J ruan,P R ukrainetz,R burton. Frequency domain modeling and identification of 2D digital servo valve[J].International Journalof Fluid Power,2000,1(2): 120.
  • 7GB50018-2002 冷弯薄壁型钢结构技术规范[S].2002.
  • 8FEM10.2.02. THE DESIGN OF STATIC STEEL PALLET RACKING[S].Belgium,2001.
  • 9王群,汪乐,王延安.浅谈货架钢结构[J].山西建筑,2009,35(20):67-68. 被引量:1
  • 10李晓田,王安麟,慈健,吴仁智.几何参数化计算的柴油机冷却风道键合图模型[J].农业机械学报,2009,40(8):31-35. 被引量:3

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部